Request a Quote

Please fill out the following form below.

Amron International Model 8330iC Air Control and Depth Monitoring System with Communicator for 3 Divers

SKU: 8330ic Rate this product

$16,000.00

Availability: 1 In Stock

Click to Enlarge Image

Overview

Specifications Air Control

  • Air Control - High Pressure Inputs (3)
    • Input Pressure Range: 500-5000 PSI
    • Inlet Valve - Regulating Type
    • Gauge - 0-6000 PSI: Accuracy +/- 1.5%
    • Filter, In Line Pre Regulator: 50 Micron
  • Air Control - High Pressure Regulators (3) 
    • Outlet Pressure Range: 0-400 PSI
    • High Flow: Cv = 0.8
    • Max Pressure: 6000 PSI
  • Low Pressure Input, with Check Valves (3)
    • Max Pressure: 350 PSI
    • Inlet Connection (#8 JIC)
    • Diver Outlet Connection, (O2 Fitting)
    • Diver Outlet Valve (Ball)
    • Air Pressure Gauge, 0-600 PSI: Accuracy +/- 1.5%
    • Over Pressure Relief Valve Set Pressure: 350 PSI
  • Panel Construction
    • Panel Material: Stainless Steel
    • Powder Coating: Black Textured Semi-Gloss Polyester
    • Silkscreen Graphics: White, Green, Red & Blue

Specifications Depth Monitoring (Pneumo)

  • Pneumo Gauge, 3-D Precision
    • Mirrored Scale, 6 Inch: (3)
    • Range: Dual Scale 0-250 FSW/0-76 MSW
    • Divisions: 1 Foot
    • Accuracy: 0.25% of Full Scale
  • Pneumo Valve
    • Regulating Valve, KEL-F Seat: (3)
  • Outlet Connection
    • O2 Fitting Chrome Plated Brass: (3)
  • Panel Material
    • Material: Aluminum
    • Powder Coating: Black Textured Semi-Gloss Polyester
    • Silkscreen Graphics: Yellow

Specifications Communications

  • Model 2830A-8330iC 3-Diver Communicator
    • Operating Voltage: 9-18 VDC
    • Power: Rechargeable Battery
    • External Power: 12-18 VDC
    • Operating Time: Nominal 15 Hour
    • Charger: 110/220 Volt
    • Frequency Response: 300-10000 Hz
    • Audio Power: 20 Watt
    • Panel: Black Powder Coat over Stainless Steel with White Silkscreen Graphics

Specifications Enclosure

  • Case Material
    • Pressure molded fiberglass, with aluminum and or stainless steel hardware. Includes carrying handle, latches, and stay hinge to lock unit in open position (upper section is locked upright in respect to lower section).
  • Case
    • Lid closed: 24-1/4" W x 19-1/2" D x 14" H
    • Lid Open: 24-1/4" W x 24-1/2" D x 28-1/2" H
    • Weight: Approximately 108 lbs.
    • Color: International yellow
Descriptions

The Amron International Model 8330iC Air Control and Depth Monitoring System with Communicator for 3 Divers is a portable, self-contained three commercial diver high and low pressure air control and depth monitoring (pneumo) system for surface supplied commercial diving operations.

The Model 8330iC is designed to provide a central control point for the supply of breathing air to three commercial divers and monitor their depth. The 8330iC is housed in a durable, pressure-fused fiberglass case that provides a convenient, compact, rugged and professional system.

This system is specifically designed with three independent diver channels that meet the International Marine Contractors Association (IMCA) guidelines - IMCA D023 DESIGN for Surface Oriented Air Systems.

Attachments
Videos

Additional Information

Brand Amron International
Communications Yes
Video No
FAQ
 

Product FAQ's

Ask a Question

  • Can I operate my communicator while I’m charging the internal battery?
    Yes, however, the charger will charge the battery at a slower rate as some of the charger power is being used to operate the communicator. For the communicator only, units without options, about 20% of the charger’s power is being used by the communicator but units with HSU (Helium Speech Unscrambler) most of the battery charger energy is going to the communicator and HSU.
    How helpful was this information?

  • What is the input voltage range for the 2823-603 External Battery Charger?
    The 2823-603 can operate over an input voltage range from 90-264 VAC. It operates over an input frequency range from 47-440 Hz.
    How helpful was this information?

  • Why does the speaker on my communicator sound muffled?
    The simplest way to fix this issue is to unplug the red banana plug from the red microphone 5-way binding post on the communicator and rotate it 180 degrees then reinstall it. This should fix your problem. For a more detailed explanation of what happened, please read below. The issue is not with the communicator, it is with the wiring of the umbilical. There is always the potential for wiring the speakers and microphone out of phase, similar to wiring the speakers on a car stereo system. There is an orientation to the banana jacks and they should be wired for proper phasing with the communicator. A banana plug does have an identified ground side marked on the plug. Amron always sets up their umbilicals so that the ground side is located on the left side so the user can consistently plug in their umbilical and avoid phasing issues. If a banana plug is plugged upside down or is wired out of phase, the sound quality will be significantly reduced. If the phasing is out and the orientation of both plugs are the same, then the banana plug wiring should be reversed on “only one plug” to avoid this issue again. It does not matter which plug you choose to reverse the wiring on.
    How helpful was this information?