×

:

Not a valid Time
This is a required field.

Amron Commercial 3-Part Spiral Diving Umbilical 325 ft. & 4-Pin Female Waterproof Connector

SKU
DSLS1-XX0X00M210-325
$4,404.00

Restrictions / Notifications

  • No Free Shipping
    This item does not qualify for free shipping.
  • Non-Returnable/Non-Cancelable
    This item cannot be canceled or returned once an order has been placed.
More Information
Features

  • Rugged, flexible and long-lasting.
  • Resistant to abrasion and kinking.
  • Buoyant in seawater and freshwater.
  • Clean and odor-free hoses.
  • Spiral wound elements.

 

3-PART UMBILICAL – AIR, PNEUMO & COMMS WITH STRENGTH ELEMENT INCLUDES
  • Length: 325 ft.
  • 3-Part spiral wound umbilical - air, pneumo, and comms/strength
  • Oxygen fittings installed on both ends of the diver's hose and surface end of the pneumo hose.
  • 4-pin female waterproof connector installed on the diver's end of the comm cable.
  • Dual pin banana plugs (red & black) on the surface end of the comm cable.
  • Snap shackle (MWL 2425 lb. / BL 4850 lb.) with welded D-ring installed on diver end, seized 48 in. from the umbilical end.
  • D-ring installed on the surface end, seized 10 ft. from the umbilical end.
  • Brass tag showing manufacturing and testing information.
  • Fully tested, includes testing certification.

 


Specifications

DCS0001 Communication Cable
  • Shielded, Twisted Pairs: 2 x 0.5 mm2 (20 AWG)
  • Polyester Strength Braid: 500 kg minimum break strength
  • Red Polyurethane Outer Sheath: 1.7 mm nominal thickness
  • Weight in Air: 120 kg/km
  • Weight in Sea Water: 25 kg/km
  • O.D. mm: 11.0 mm
  • Diver side rubber molded connector - 4 socket female - used with KMDSI helmets P/N: RMG-4-FS
  • Surface side dual pin banana plugs (red & black) P/N: 14001R (red) & 14001B (black)
  • Insulation Color: Red

 

FLT04 - 1/4 in. PNEUMO HOSE
  • Hose Type: Fibrolite
  • Max Working Pressure: 400 PSI / 27.5 bar
  • Minimum Burst Pressure: 1600 PSI / 110 bar
  • Nominal Bore: 1/4 in. / 6.3 mm
  • Outside Diameter: 11.5 mm
  • Weight in Air: 82 kg/km
  • Weight in Sea Water: -25 kg/km
  • Minimum Bend Radius (Static): 75 mm
  • Minimum Bend Radius (Dynamic): 115 mm
  • Tensile Rating: 100 kg
  • 1/4 in. oxygen hose fitting, swaged (phosphor-bronze) P/N: FPBSF/M/04-04OXY
  • Hose Color: Yellow

 

FLT06 - 3/8 in. BREATING AIR HOSE
  • Hose Type: Fibrolite
  • Max Working Pressure: 500 PSI / 35 bar
  • Minimum Burst Pressure: 2000 PSI / 140 bar
  • Nominal Bore: 3/8 in. / 9.5 mm
  • Outside Diameter: 17.5 mm
  • Weight in Air: 193 kg/km
  • Weight in Sea Water: -53 kg/km
  • Minimum Bend Radius (Static): 105 mm
  • Minimum Bend Radius (Dynamic): 1160 mm
  • Tensile Rating: 100 kg
  • 3/8 in. oxygen hose fitting, swaged (phosphor-bronze) P/N: FPBSF/M/06-04OXY
  • Hose Color: Blue

 

Notes
  • Umbilical lengths are subject to +/- 2% over/under the quoted length.
  • Canadian Standards Association code CSA-275.2-04 states that the diver’s lifeline shall have a breaking strength of no less than 2000 lb. This umbilical does not meet that standard. Please contact your Amron sales representative for alternate spiral umbilical material that can meet this standard.
  • Australian Standards AS2299.1 3.13.6 requires that the minimum breaking strength of any potential load bearing component of a diver’s umbilical or lifeline shall be at least 6 kn (600 kg). This umbilical does not meet that standard. Please contact your Amron sales representative for alternate spiral umbilical material that can meet this standard.
     

Amron sells many different diving umbilical configurations. If you don't see the configuration you need, please call our award-winning sales staff at (760) 208-6500 or email us at sales@amronintl.com to help build your diving umbilical, get a quote, and place your order today!

FAQ's
Hi,What is the hose made of? Thanks
Fibrolite Gas and hot water hoses : - Polyether based polyurethane liner - food grade. - 1 layer (all sizes) braided (open weave) polyester fibre reinforcement - Overall optimum polyurethane extruded cover
Amron International Customer Service
We respond to most inquiries within 24 hours, Monday – Friday, excluding holidays.
Phone
Toll-Free: (877) 462-6700
Local & International: (760) 208-6500
Fax: (760) 599-3857
Email
sales@amronintl.com
Hours of Operation
Customer Service
Monday - Friday, 8am – 5pm Pacific Time Zone

Warehouse/Will Call Orders
Monday – Friday, 9am – 3:30pm Pacific Time Zone
We found other products you might like!