Request a Quote

Please fill out the following form below.

Stanley Tools BR87320 Hydraulic Underwater Heavy Duty Breaker - 1-1/8 Shank (Includes Hose Whips & Couplers)

SKU: BR87320 Rate this product

List Price: $2,960.00

$2,812.00

Availability: 1 In Stock. Usually ships in 7 weeks if not in stock.

Restrictions / Notifications

  • No Free Shipping
    This item does not qualify for free shipping.

Click to Enlarge Image

Overview

Application:

  • Utility Construction
  • Street Maintenance
  • Repair of Water and Gas mains
  • General Contracting jobs

Features:

  • Feathering ON/OFF valve to control output energy of the underwater tool through the full range from 0 to 1,800 bpm making start-up and initial underwater tool placement easy by the commercial diver
  • Diaphragm-Type Accumulator design provides for ease of maintenance and extended service life of the underwater tool.
  • Handles system back pressures up to 250 psi (17 bar)
  • Accepts standard 1-1/8 in. chuck sizes

Specifications:

  • Capacity: 1-1/8 in. x 6 in. Hex
  • Weight: 83 lbs.
  • Length: 29 in.
  • Width (at handles): 16 in.
  • Pressure: 1500 - 2000 psi
  • Flow Range: 7 - 9 gpm
  • Optimum Flow: 8 gpm
  • Porting: 8 SAE O-Ring
  • Connect Size and Type: 3/8 in. Male Pipe Hose End

Stanley Hydraulic Underwater Heavy Duty Breaker BR87 - P/N: BR87320 Includes:

  • (2) 12 in. Pigtail Hose whips (All tools require 2) - P/N: 01652
  • (1) Quick Disconnect Face Coupler Set 3/8 in. NPT - P/N: 03971
  • User Manual

Note: Stanley suggest cleaning the sintered filter installed inside the valve cap assembly after every dive. To clean the filter, Stanley suggest soaking the filter in light oil after each use then blow the filter out with compressed air from the inside out while removed from the breaker. If the filter does not appear to be clean after this cleaning, replace the entire valve cap assembly.

Description

The Stanley Hydraulic Underwater Heavy Duty Breaker BR87 is a heavy-duty underwater tool made for commercial diving work in the 90 foot pound per blow impact class and above. With a longer piston stroke, the Stanley Hydraulic Underwater Heavy Duty Breaker BR87 is one of the hardest hitting handheld breakers that Stanley carries. The Stanley Hydraulic Underwater Heavy Duty Breaker BR87 is highly productive in underwater construction, breaking concrete and rock underwater, repair of water and gas mains underwater, and general underwater contracting jobs.

The Stanley Hydraulic Underwater Heavy Duty Breaker BR87 comes with hose whips and quick disconnect couplers.

The Stanley Hydraulic Underwater Heavy Duty Breaker BR87 has a feathering On/Off Valve which controls speed, making start-up and initial underwater tool placement easy. A diaphragm accumulator provides trouble-free operation and they will handle system back pressures up to 250 psi (17 bar).

The Stanley Hydraulic Underwater Heavy Duty Breaker BR87 operates on open-center systems and is available in 1-1/8 in. chuck hex size.

*Please reference the ATTACHMENTS tab for downloadable and printable files on this underwater tool.

FAQ
 

Product FAQ's

Ask a Question

  • How do I clean the Valve Cap Assembly?
    Stanley suggest soaking the filter in light oil after each use then blow the filter out with compressed air from the inside out while removed from the breaker. If the filter does not appear to be clean after this cleaning, replace the entire valve cap assembly.
    How helpful was this information?

  • Where is the Valve Cap Assembly located?
    The Valve Cap Assembly looks like a large nut and is located on top of the Handle Assembly.
    How helpful was this information?

  • Will my tool operate if I use a lower flow rate than what would be considered optimum for the tool to operate?
    Yes, most tools have an optimal flow range, as long as the gallons per minute delivered to the tool is within this range the tool will work. However, please be award that the tool will run at a slower speed based on the flow rated delivered to the tool. Basically, the lower the gallons per minute the slower the tool will run.
    How helpful was this information?

  • Do any of the Stanley hydraulic tools ship full of hydraulic oil?
    No, but the factory normally will leave a little fluid inside the tool to help lubricate the internal components during storage.
    How helpful was this information?

ATTACHMENTS

Customers Who Bought This Item Also Bought