Stanley Hydraulic Underwater Hammer Drill 2 Inch Chuck

Only %1 left

SKU

HD45310XX

was $4,943.00 As low as $4,943.00

Restrictions / Notifications

No Free Shipping
This item does not qualify for free shipping.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Specs

More Information

Applications

Drilling concrete
Masonry
Asphalt

Features

Adjustable bit rotation speed (forward and reverse) up to 300 rpm, making the underwater tool easy to start and control.
Feathering ON/OFF valve allows the commercial diver to control the amount of energy to the underwater tool, providing more control and ease of handling.
T-Handle with large on/off trigger for precise control.
Stainless Steel spools and fasteners
Uses 736 skil fluted carbide tipped drill bits - requires no water/air to clear holes.
Drills ¾ in. to 2-inch diameter holes, up to 29 inches deep, and the core drills up to 4 inches in diameter.
Operates in any position.
Trouble-free drill steel latch retainer.

Specifications

Chuck Capacity: Up to 2 in. diameter or 4 in. core
Steel Capacity: 736 skil hex
Circuit Type: Open center
Output: 0-300 rpm
Flow Range: 7-9 gpm (26-34 lpm)
Optimum Flow: 8 gpm (30 lpm)
Working Pressure: 1500-2000 psi (105-140 bar)
Full Relief Setting: 2250 psi (155 bar)
Rotation Speed: 0-300 rpm
Weight: 49 lb. (22.2 kg)
Length: 24.5 in. (62.2 cm)
Width (at handles): 14 in. (35 cm)
Motor: Internal
Hydraulic Ports: 8 SAE O-Ring
Couplers: Varies with model
Hose Whips: 3/8 in. NPT male thread

Item #	Version	Included
HD45310	Standard Model	Includes Hose Whips, excludes Quick Couplers
HD4531001	CE Certified Model	Includes Hose Whips and Quick Couplers

Information

The Stanley Hydraulic Underwater Hammer Drill HD45 is a rotary, percussion tool used by commercial divers for underwater drilling in concrete, masonry, or asphalt using 736 Skil hex bits. The Stanley Hydraulic Underwater Hammer Drill HD45 is a heavy-duty model designed for commercial divers to use in medium to heavy underwater applications. It's the ideal underwater tool for drilling gas and water utility holes and setting anchor bolts.

The Stanley Hydraulic Underwater Hammer Drill HD45 comes furnished with hose whips, quick disconnect couplers are sold separately.

Drills Holes from 3/4 in. (19 mm) to 2 in. (50 mm) in diameter and up to 29 in. (73.7 cm) deep as well as core drilling up to 4 in. (102 mm) in diameter.

Uses Standard Skil 736 type carbide tipped, fluted drill bits and requires no fluid to clear holes during underwater operation. Feathering On/Off Valve with Adjustable Bit Rotation Speed (forward and reverse) make the Stanley Hydraulic Underwater Hammer Drill HD45 easy to start and easy to control.

*Please reference the RESOURCES tab for downloadable and printable files on this underwater tool.

Resources