Stanley BR67320 Hydraulic Underwater Medium to Heavy Breaker - 1-1/8 Inch Shank (Includes Hose Whips & Couplers)

Application:

• Utility Construction
• Street Maintenance
• Repair of Gas mains

Features:

• Feathering On/Off Valve controls blow speed, making startup and initial underwater tool placement easy for the commercial diver
• Diaphragm-Type Accumulator design provides for trouble free operation and added punch with reduced recoil
• Will handle system back pressures up to 250 psi
• Accepts standard 1-1/8 inch hex tool bits

Specifications:

• Input flow range: 7 - 9 gpm (26 – 34 lpm) at the commercial diver
• Input pressure: 1500 - 2000 psi (105 – 140 bar)
• Maximum back pressure: 250 psi (17 bar)
• Optimum flow: 8 gpm (30 lpm)
• Steel capacity: 1-1/8 in. x 6 in. hex
• Weight: 67 lbs (30 kg)
• Length: 27 in. (68 cm)
• Width (at handles): 16 in. (41 cm)
• Porting: 8 SAE O-Ring
• Connector: 3/8 in. male pipe hose end

Stanley Hydraulic Underwater Breaker BR67 - P/N: BR67320 Includes:

• (2) 12 in. Pigtail Hose whips (All tools require 2) - P/N: 01652
• (1) Quick Disconnect Face Coupler Set 3/8 in. NPT - P/N: 03971
• User Manual

Note: Stanley suggest cleaning the sintered filter installed inside the valve cap assembly after every dive. To clean the filter, Stanley suggest soaking the filter in light oil after each use then blow the filter out with compressed air from the inside out while removed from the breaker. If the filter does not appear to be clean after this cleaning, replace the entire valve cap assembly.