Stanley BR45350 Hydraulic Underwater Light To Medium Duty Breaker - 1 Inch Shank (Includes Hose Whips & Couplers)

Application:

• Light to medium duty operation
• Curb/Sidewalk demolition
• Asphalt Cutting
• Popular for ground rod driving

Features:

• Feathering ON/OFF valve to control output energy of the underwater tool through the full range from 0 to 1,800 making start-up and initial underwater tool placement easy
• Diaphragm-Type Accumulator design provides for ease of maintenance and extended service life of the underwater tool.
• Will handle system back pressures up to 250 psi (17 bar)
• Accepts standard 1 in. hex tool bits

Specifications:

• Steel Capacity: 1 in. Hex x 4-1/4 in.
• Output : 1800 Blows Per Minute
• Input Flow Range: 7 - 9 gpm (26-34 lpm) at the diver
• Input Pressure: 1500 - 2000 psi (105 - 140 bar)
• Max. Back Pressure: 250 psi (17 bar)
• Optimum Flow: 8 gpm (30 lpm)
• Porting: 8 SAE O-Ring
• Connector: 3/8 in. Male Pipe Hose End
• Weight: 45/48 lbs (20/21 kg)
• Length: 23.5/25.5 in. (60/65 cm)
• Width (At Handles): 14 in. (35 cm)

Stanley Hydraulic Underwater Breaker BR45 - P/N: BR45350 Includes:

• (2) 12 in. Pigtail Hose Whips (All tools require 2): P/N: 01652
• Quick Disconnect Couplers - P/N: 03971
• User Manual

Note: Stanley suggest cleaning the sintered filter installed inside the valve cap assembly after every dive. To clean the filter, Stanley suggest soaking the filter in light oil after each use then blow the filter out with compressed air from the inside out while removed from the breaker. If the filter does not appear to be clean after this cleaning, replace the entire valve cap assembly.