-
Call Us
(877) 462-6700
(760) 208-6500
-
Don't want to call?
-
Service Questions
- Overview
-
Features
- Easily configured
- Interchangeable sensors and software allowing greater flexibility
- Available as either a panel or rack mount analyzer
Specifications
- Range: 0 to 100% or 0 to 3000mBar
- Display resolution: 0.01%
- Alarms: 1 x high going, 1 x low going (fully adjustable)
- Pressure range: 700 to 1,300 mBar
- Recommended flow rate: 0.2 to 1.0 litre/minute
- Descriptions
-
The new Analox SDA O2 Monitor will offer users the latest digital technology in commercial diving gas detection.
The Analox SDA series is a range of fixed external chamber analyzers used to control levels of gases such as oxygen and carbon dioxide. The new products are designed to be more easily configured to meet the users’ needs, with interchangeable sensors and software.
The Analox SDA O2 is available in either panel or rack mount format.
More options are available for the Analox SDA O2 . Please call Amron's award winning sales staff at (760) 208-6500 to assist you with your Analox SDA O2, get a quote, and place your order today!
- Attachments
-
Analox SDA O2 Technical Specification Sheet (Size: 1 MB) Analox SDA User Manual (Size: 2.4 MB) - Videos
-
Brand Analox Video No - FAQ
-
Product FAQ's
-
Is the flow meter panel a new offering? What can I use it for?
Yes. During the development phase of the SDA, customer feedback suggested a solution for monitoring flow to the O2 analyzers was required. This new flow meter panel now offers this in an easy to install unit which will compliment the analyzers in your panel.
-
How long does the datalogging unit log for?
90 days of continual logging. The oldest data is then over-written.
-
My current 0-100% Analox 1000 O2 monitor also has a battery back up, does the SDA offer this?
The SDA does not offer a battery back up option as the vast majority of diving systems now have un-interrupted power supply.
-
What do I need to order to replace my current rack mounted 0-100% Analox 1000? I utilize a relay on each of the alarms.
You simply need to order an SDA rack mounted monitor configured for O2 along with the universal output module.
-
Can I use the existing O2 sensors I have with the SDA O2?
No, the O2 sensors used with the SDA are new and intelligent sensors which will signal when they need calibrating and changing. They also have the added benefit of having the ability to be positioned as far away from the monitor as you wish; unlike current analogue systems.
-
Our panel is situated in a very low light area – can the screen brightness be adjusted?
Yes – this option is on the basic on screen menu accessed with the buttons on the monitor itself.
-
I don’t see that the SDA has any calibration pots – how are they calibrated?
The SDA has a very intuitive rotary encoder dial, this coupled with the familiar retro toggle switches and appropriate zero and span gases will mean that these analyzers are easier to calibrate than others you may have used.
-
What is the configuration software for?
You are able to buy an SDA monitor configured for O2 without the sensor. If you then purchase the configuration software you can then configure the unit to be used as a CO2 unit. This is designed to offer users more flexibility when managing spares.
You can also access other features on this CD such as training videos and other features such as the on screen naming of your monitor to correspond with a particular chamber or lock. -
My current monitors run off a mains power supply – is this a problem when considering an SDA?
Not at all – each SDA is configured for 24VDC power as standard but you can purchase an Analox 24VDC mains power supply which is capable of powering 2 SDA modules and their accessories.
-
Are the SDA DNV & IMCA compliant?
Yes, the SDA comply with DNVs offshore standard E402 and IMCA guidelines in that they comply with the accuracy and feature requirements.
-
I currently have an Analox 1000 (O2) monitor and an Analox 5001 (CO2) monitor in my panel. Will the SDA units fit into the same panel spaces?
Yes. The SDA O2 will fit directly into the existing panel space.
If your current 5001 CO2 unit is a combined panel mount you will also need the “5001 Compatibility Plate” to mount the SDA rack monitor and CO2 module. If your current 5001 CO2 unit is a combined rack mount, the SDA will fit direct. -
Can the SDA Oxygen Analyzer be ordered with a paramagnetic sensor?
No.
-
Is it possible to enable the data-logging feature using the software provided with my analyzer?
No, unfortunately the data-logging feature can only be added at the factory.
-
You have no items in your shopping cart.
