Analox SDAPAEXYAXXX SDA Oxygen (O2) Monitor 0-3000 mbar with Data Logging
The Analox SDA O2 (Oxygen) Monitor provides a continuous digital display of oxygen concentrations. The SDA O2 systems comprise of an SDA monitor and MEC O2 sensor module, including the oxygen cell.
Restrictions / Notifications
- Non-Returnable/Non-Cancelable
This item cannot be canceled or returned once an order has been placed.
Features:
Specifications:
|
The Analox SDA O2 (Oxygen) Monitor provides a continuous digital display of oxygen concentrations. The SDA O2 systems comprise of an SDA monitor and MEC O2 sensor module, including the oxygen cell.
The alarm set points and calibration can be achieved using the front panel user interface and the SDA provides audio/visual alarms, optional datalogging and 420mA/ relay outputs.
A full color 3.5 in. TFT display gives clear reading and status information and is suitable for a wide range of lighting and mounting positions. The controls present quick and simple access to the most common system functions such as calibration and alarm adjustment, with more detailed setup and diagnostic information accessed through an easy to use menu system. The SDA range uses a range of intelligent sensors, which means that calibration and changeout intervals can be flagged on screen to assist with your maintenance schedule.
The SDA offers a familiar and intuitive user interface and can be easily retrofitted into existing panels and racks or new installations. The RS485 communication ports on the rear of a monitor provide connections to a range of Analox gas and environmental sensors and peripherals. These provide the flexibility to mount sensors and peripherals alongside the monitor or up to hundreds of meters away without affecting performance.
The SDA range is compliant with the type approval specifications from the major classification societies in the marine industry for both the general power distribution and bridge zones.
The monitor provides a full-color display of the oxygen (O2) reading taken from an electrochemical sensor. The alarm set points and calibration can be achieved using the front panel user interface. The SDA O2 provides audio/visual alarms, optional data-logging and 4-20mA/relay outputs. The monitor interfaces with Analox's state-of-the-art digital MEC sensor.
The SDA O2 oxygen monitor replaces the now obsolete Analox 1000 and is fully retrofittable as a direct replacement.
Maintaining a comfortable and safe chamber environment is vital to achieving a successful diving operation. The accuracies supplied by the SDA O2 are compliant with DNV, IMCA, Lloyds, ABS, and ADCi requirements/guidelines.
The SDA O2 is normally located in sat/dive control and the sensors can be either located at the panel or inside the chamber or diving bell.
Analox offers an optional flow panel to go alongside the SDA O2, which provides fine control after the sample has been reduced from the chamber. Both the SDA O2 and the optional flow panel can be provided as either rack or panel mount.
Its flexibility is what makes it such a good product as it can suit a wide range of requirements each customer may present. There are a multitude of sensors, alarms and strobes you can attach to one CDU (central display unit). Included in this expansive set up choices are optional add ons, such as a beacon, a Kiosk set up and a DOM (Data output module).
ATTACHMENTS
FAQ's
Yes. During the development phase of the SDA, customer feedback suggested a solution for monitoring flow to the O2 analyzers was required. This new flow meter panel now offers this in an easy to install unit which will compliment the analyzers in your panel.
Amron International Customer Service
We respond to most inquiries within 24 hours, Monday – Friday, excluding holidays.Phone
Toll-Free: (877) 462-6700Local & International: (760) 208-6500
Fax: (760) 599-3857
Hours of Operation
Customer ServiceMonday - Friday, 8am – 5pm Pacific Time Zone
Warehouse/Will Call Orders
Monday – Friday, 9am – 3:30pm Pacific Time Zone
