Request a Quote

Please fill out the following form below.

Stanley Tools BR67320 Hydraulic Underwater Medium to Heavy Breaker - 1-1/8 Inch Shank (Includes Hose Whips & Couplers)

SKU: BR67320

List Price: $2,600.00

$2,470.00

Availability: Usually ships 5 weeks after receipt of order

Restrictions / Notifications

  • No Free Shipping
    This item does not qualify for free shipping.

Click to Enlarge Image

Overview

Application:

  • Utility Construction
  • Street Maintenance
  • Repair of Gas mains

Features:

  • Feathering On/Off Valve controls blow speed, making startup and initial underwater tool placement easy for the commercial diver
  • Diaphragm-Type Accumulator design provides for trouble free operation and added punch with reduced recoil
  • Will handle system back pressures up to 250 psi
  • Accepts standard 1-1/8 inch hex tool bits

Specifications:

  • Input flow range: 7 - 9 gpm (26 – 34 lpm) at the commercial diver
  • Input pressure: 1500 - 2000 psi (105 – 140 bar)
  • Maximum back pressure: 250 psi (17 bar)
  • Optimum flow: 8 gpm (30 lpm)
  • Steel capacity: 1-1/8 in. x 6 in. hex
  • Weight: 67 lbs (30 kg)
  • Length: 27 in. (68 cm)
  • Width (at handles): 16 in. (41 cm)
  • Porting: 8 SAE O-Ring
  • Connector: 3/8 in. male pipe hose end

Stanley Hydraulic Underwater Breaker BR67 - P/N: BR67320 Includes:

  • (2) 12 in. Pigtail Hose whips (All tools require 2) - P/N: 01652
  • (1) Quick Disconnect Face Coupler Set 3/8 in. NPT - P/N: 03971
  • User Manual

Note: Stanley suggest cleaning the sintered filter installed inside the valve cap assembly after every dive. To clean the filter, Stanley suggest soaking the filter in light oil after each use then blow the filter out with compressed air from the inside out while removed from the breaker. If the filter does not appear to be clean after this cleaning, replace the entire valve cap assembly.

Description

The Stanley Hydraulic Underwater Breaker BR67 is medium duty underwater tool used by commercial divers for work in the 70-90 foot per pounds per blow impact class. This underwater tool is highly productive in underwater utility construction. This is primary used by commercial divers underwater for coral/barnacle removal, driving anchors, and breaking rock underwater.

The Stanley Hydraulic Underwater Breaker BR67 comes with hose whips and quick disconnect couplers.

The Stanley Easi-Ride™ foot, offered on the Stanley Hydraulic Underwater BR67 Breaker, absorbs and controls tool-bit bounce, greatly reducing commercial diver fatigue.

The Stanley Hydraulic Underwater Breaker BR67 has a Feathering On/Off Valve which controls blow speed, making startup and initial underwater tool placement easy.

The Stanley Hydraulic Underwater Breaker BR67 has a Diaphragm Accumulator which provides trouble-free operation for the commercial diver with system back pressures up to 250 psi (17 bar). The Stanley Hydraulic BR67 Underwater Breaker operates on open center systems and is available in 1-1/8 in. chuck hex size.

*Please reference the ATTACHMENTS tab for downloadable and printable files on this underwater tool.

FAQ
 

Product FAQ's

Ask a Question

  • How do I clean the Valve Cap Assembly?
    Stanley suggest soaking the filter in light oil after each use then blow the filter out with compressed air from the inside out while removed from the breaker. If the filter does not appear to be clean after this cleaning, replace the entire valve cap assembly.
    How helpful was this information?

  • Where is the Valve Cap Assembly located?
    The Valve Cap Assembly looks like a large nut and is located on top of the Handle Assembly.
    How helpful was this information?

  • Will my tool operate if I use a lower flow rate than what would be considered optimum for the tool to operate?
    Yes, most tools have an optimal flow range, as long as the gallons per minute delivered to the tool is within this range the tool will work. However, please be award that the tool will run at a slower speed based on the flow rated delivered to the tool. Basically, the lower the gallons per minute the slower the tool will run.
    How helpful was this information?

  • Do any of the Stanley hydraulic tools ship full of hydraulic oil?
    No, but the factory normally will leave a little fluid inside the tool to help lubricate the internal components during storage.
    How helpful was this information?

ATTACHMENTS

Customers Who Bought This Item Also Bought