Approved Vendor Micro In-Line Connector - 3 Pin Male
SHIP NOW
SKU
MCIL3M
$52.74
Micro Series MCIL3M Male 3 Pin In-Line Connector allows for smaller through ports in a pressure vessel and a greater density of conductors in a compact area. This connector is wet-mateable therefore enabling connections to be made underwater, on-deck or in any weather condition.
Applications:
- Underwater camera and lights (video system)
- Diver communications
- ROV systems
- Submersibles
- Towed-array cable systems
- Current meters
- Animal migration research
- Food processing equipment
Specifications:
- Molded Body: Neoprene
- Contacts: Brass-gold plated
- Guide Pins: Stainless steel
- In-Line Cable: 3 pin: neoprene #18 awg (SO cable)
- In-Line Cable Length: +/- 2 ft.
- Open Face Pressure: 10,000 psi (approx. 689 bar) optional and needs to be specified dummy cap recommended above 100 psi
- Mated Pressure: 10,000 psi (approx. 689 bar)
- Voltage Rating 3 Pin: 600 vdc
- Current Rating: 6 amps per contact
- Insulation Resistance: >200 megohms @ 300 vdc
- Contact Resistance: <0.01 ohms
- Air Mate: >1,000 cycles
- Underwater Mate: >500
- Operating Temperature: 25° to 140°F (-4° to 60°C)
- Mates with: MCIL3F and MCBH3F
- Dummy Connector Mate: MCDC3F
- Connector Pin: 3
- Length: 0.75 in.
- Width: 0.62 in.
Restrictions / Notifications
- No Free Shipping
This item does not qualify for free shipping.
Micro Series MCIL3M Male 3 Pin In-Line Connector allows for smaller through ports in a pressure vessel and a greater density of conductors in a compact area. This connector is wet-mateable therefore enabling connections to be made underwater, on-deck or in any weather condition.
Applications:
- Underwater camera and lights (video system)
- Diver communications
- ROV systems
- Submersibles
- Towed-array cable systems
- Current meters
- Animal migration research
- Food processing equipment
Specifications:
- Molded Body: Neoprene
- Contacts: Brass-gold plated
- Guide Pins: Stainless steel
- In-Line Cable: 3 pin: neoprene #18 awg (SO cable)
- In-Line Cable Length: +/- 2 ft.
- Open Face Pressure: 10,000 psi (approx. 689 bar) optional and needs to be specified dummy cap recommended above 100 psi
- Mated Pressure: 10,000 psi (approx. 689 bar)
- Voltage Rating 3 Pin: 600 vdc
- Current Rating: 6 amps per contact
- Insulation Resistance: >200 megohms @ 300 vdc
- Contact Resistance: <0.01 ohms
- Air Mate: >1,000 cycles
- Underwater Mate: >500
- Operating Temperature: 25° to 140°F (-4° to 60°C)
- Mates with: MCIL3F and MCBH3F
- Dummy Connector Mate: MCDC3F
- Connector Pin: 3
- Length: 0.75 in.
- Width: 0.62 in.
FAQ's
Is it possible to re-connect underwater at a depth of 100 meters?
Technically you can mate this connector at full depth rating. However, divers can only dive a certain depth, unless you have an ROV to mate it much deeper. The difficult part is to de-mate the connector underwater for the fact that the pressure keeps the connector mated and virtually impossible for a diver to de-mate. When connected and you try to pull apart underwater, this creates a vacuum which holds the connector mated unless you have enough torque to pull apart. The connector can re-connect at 100M.
Amron International Customer Service
We respond to most inquiries within 24 hours, Monday – Friday, excluding holidays.Phone
Toll-Free: (877) 462-6700Local & International: (760) 208-6500
Fax: (760) 599-3857
Hours of Operation
Customer ServiceMonday - Friday, 8am – 5pm Pacific Time Zone
Warehouse/Will Call Orders
Monday – Friday, 9am – 3:30pm Pacific Time Zone
Customers who viewed this item also viewed
Check items to add to the cart or
We found other products you might like!
-
Approved Vendor Female Black Delrin Locking Sleeve 2 through 8 ContactsSKU: MCDLS-FSHIP NOW$17.49 -
-
