Amron Two-Diver Air Control & Depth Monitoring System without Communications - IMCA Compliant

• The Amron Model 8225i IMCA air control is designed to support two divers and is a portable, self-contained high/low pressure air control with depth monitoring (pneumo) for surface supplied commercial diving operations.
• This air control is specifically designed with two independent diver channels that are compliant with International Marine Contractors Association (IMCA) guidelines - IMCA D023 DESIGN for Surface Oriented Air Systems.
• The Model 8225i is housed in a durable, pressure-fused fiberglass case that provides a convenient, compact, rugged and professional system.

• High air pressure inputs are color coded (Red and Blue) for ease of identification.
• Each input has a 0-6000 PSIG gauge and shut off valve to monitor and switch from one high pressure air source to the other.
• The added safety feature of check valves provides protection against back flow of air from a full tank into an empty tank when switching high pressure air supply sources.
• High pressure air is reduced to low pressure via a pressure reducing regulator with a pre-regulator in-line 50 micron filter.
• A relief valve (factory set at 350 PSIG) prevents over pressurization.

Note: HP hoses are not included. If HP hoses are required, please add 2 ea. High Pressure Hose Whips with Yoke to your order.

• Divers air hose connections are O2 fittings, controlled by quarter turn ball valves permitting unrestricted flow. Note: O2 fittings can be converted to JIC upon request.
• The LP inputs with safety check valves have a #6 JIC fitting and is protected from over pressurization by an over pressure relief valve set at 350 PSI.

• The heart of the pneumo system are two 6 in. gauges with 0.25% % of full-scale accuracy and dual scale readings of 0-250 feet of seawater (FSW) and 0-76 meters of seawater (MSW). The gauge dials have a glare free face, mirror band with clearly marked increments for fast accurate readings with 1 ft. divisions.
• Regulating valve, KEL-F Seat: (2) with O2 fitting chrome plated brass.

• Air Control - High Pressure Input (2)
  • Input Pressure Range: 500-5000 PSI
  • Inlet Valve: Regulating type
  • Gauge: 0-6000 PSI (accuracy +/- 1.5%)
  • Filter, In Line Pre Regulator: 50 micron
  • Inlet Connection: #4 JIC (stainless steel)
• Air Control - High Pressure Regulators (2)
  • Outlet Pressure Range: 0-400 PSI
  • High Flow: Cv = 0.8
  • Max Pressure: 6000 PSI
• Low Pressure Input, with Check Valve (2)
  • Max Pressure: 350 PSI
  • Inlet Connection (#6 JIC)
  • Air Pressure Gauge, 0-600 PSI: Accuracy +/- 1.5%
  • Over Pressure Relief Valve Set Pressure: 350 PSI
• Low Pressure Output (2)
  • Diver Outlet Connection, (O2 fitting, chrome plated brass)
  • Diver Outlet Valve (Ball)
• Panel Material
  • Material: Aluminum
  • Powder Coating: Black textured semi-gloss polyester
  • Silkscreen Graphics: Yellow

• Pneumo Gauge (2)
  • Mirrored Scale, 6 in.
  • Range: Dual Scale 0-250 FSW/0-76 MSW
  • Divisions: 1 ft.
  • Accuracy: 0.25% of full scale
• Pneumo Valve
  • Regulating valve, KEL-F seat: (2)
• Outlet Connection
  • O2 fitting chrome plated brass: (2)
• Panel Material
• • Material: Aluminum
  • Powder Coating: Black textured semi-gloss polyester
  • Silkscreen Graphics: Yellow

Note: HP hoses are not included. If HP hoses are required, please contact your Amron representative.

• Case Material
  • Pressure molded fiberglass, with aluminum and or stainless steel hardware. Includes carrying handle, latches, and stay hinge to lock unit in an open position (upper section is locked upright in respect to lower section).
• Case
  • Lid closed: 24-1/4 in. W x 19-1/2 in. D x 14 in. H
  • Lid Open: 24-1/4 in. W x 24-1/2 in. D x 28-1/2 in. H
  • Weight: Approximately 80 lb.
  • Color: International yellow

• Mixed gas diving operations with an oxygen level greater than 25%.
• Oxygen or oxygen enriched breathing mixtures above 25%.