×

:

Not a valid Time
This is a required field.

Amron 600 ft. Military 3-Part Umbilical Air/Pneumo/Comms

SKU
DSLS1-XX0X00MN40-600
$7,912.52

Features:

  • Tough, kink and abrasion resistant
  • Buoyant in sea and fresh water
  • Clean and odor free
  • Flexible and non-aging

Includes:

  • Length: 600 ft.
  • 3 Part umbilical-Air, Pneumo and Comms/Strength
  • (3) Oxygen fittings - Installed on both ends of the divers hose and the surface end of the pneumo hose
  • 4-Pin female waterproof connector installed on the diver's side of the communications cable
  • Navy 5-Pin male MS Connector on the surface end of the communications cable
  • D-ring with shackle installed on the diver's end and seized 48 inches from end of hose
  • D-ring installed on the surface end and seized 10 feet from end of hose
  • Brass tag
  • Tested with certification provided

Note: Umbilical lengths are subject to +/- 2% over/under to the quoted length.

Note: Canadian Standards Association code CSA-275.2-04 states that the diver’s lifeline shall have a breaking strength of no less than 2000 lbs. This umbilical does not meet that standard. Please contact your Amron sales representative for an alternate spiral umbilical that can meet this standard.

Note: Australian Standards AS2299.1 3.13.6 requires that the minimum breaking strain of any potential load bearing component of a diver’s umbilical or lifeline shall be at least 6kn (600kg). This umbilical does not meet that standard. Please contact your Amron sales representative for an alternate spiral umbilical that can meet this standard.

Restrictions / Notifications

  • No Free Shipping
    This item does not qualify for free shipping.
  • Non-Returnable/Non-Cancelable
    This item cannot be canceled or returned once an order has been placed.

Features:

  • Tough, kink and abrasion resistant
  • Buoyant in sea and fresh water
  • Clean and odor free
  • Flexible and non-aging

Includes:

  • Length: 600 ft.
  • 3 Part umbilical-Air, Pneumo and Comms/Strength
  • (3) Oxygen fittings - Installed on both ends of the divers hose and the surface end of the pneumo hose
  • 4-Pin female waterproof connector installed on the diver's side of the communications cable
  • Navy 5-Pin male MS Connector on the surface end of the communications cable
  • D-ring with shackle installed on the diver's end and seized 48 inches from end of hose
  • D-ring installed on the surface end and seized 10 feet from end of hose
  • Brass tag
  • Tested with certification provided

Note: Umbilical lengths are subject to +/- 2% over/under to the quoted length.

Note: Canadian Standards Association code CSA-275.2-04 states that the diver’s lifeline shall have a breaking strength of no less than 2000 lbs. This umbilical does not meet that standard. Please contact your Amron sales representative for an alternate spiral umbilical that can meet this standard.

Note: Australian Standards AS2299.1 3.13.6 requires that the minimum breaking strain of any potential load bearing component of a diver’s umbilical or lifeline shall be at least 6kn (600kg). This umbilical does not meet that standard. Please contact your Amron sales representative for an alternate spiral umbilical that can meet this standard.

FAQ's
Hi,What is the hose made of? Thanks
Fibrolite Gas and hot water hoses : - Polyether based polyurethane liner - food grade. - 1 layer (all sizes) braided (open weave) polyester fibre reinforcement - Overall optimum polyurethane extruded cover
Amron International Customer Service
We respond to most inquiries within 24 hours, Monday – Friday, excluding holidays.
Phone
Toll-Free: (877) 462-6700
Local & International: (760) 208-6500
Fax: (760) 599-3857
Email
sales@amronintl.com
Hours of Operation
Customer Service
Monday - Friday, 8am – 5pm Pacific Time Zone

Warehouse/Will Call Orders
Monday – Friday, 9am – 3:30pm Pacific Time Zone
We found other products you might like!