Amron 400 ft. Military 3-Part Umbilical Air/Pneumo/Comms

• Tough, kink and abrasion resistant
• Buoyant in sea and fresh water
• Clean and odor free
• Flexible and non-aging

• Length: 400ft.
• 3 part umbilical
  • Air, pneumo and comms/strength
• (3) Oxygen fittings
  • Installed on both ends of the divers hose and the surface end of the pneumo hose
• 4-Pin female waterproof connector installed on the diver's side of the communications cable
• Dual banana plugs on the surface end of the communications cable
• Snap Shackle (MWL 2980 lbs./BL 5950 lbs.) with D-Ring Attached 550-0016-01 installed on diver’s end and seized 48 inches from the end of the hose.
• D-ring installed on the surface end and seized 10 feet from end of hose
• Brass tag
• Tested with certification provided

NOTE: Umbilical lengths are subject to +/- 2% over/under to the quoted length.

NOTE: Canadian Standards Association code CSA-275.2-04 states that the diver’s lifeline shall have a breaking strength of no less than 2000 lbs. This umbilical does not meet that standard. Please contact your Amron sales representative for an alternate spiral umbilical that can meet this standard.

NOTE: Australian Standards AS2299.1 3.13.6 requires that the minimum breaking strain of any potential load bearing component of a diver’s umbilical or lifeline shall be at least 6kn (600kg). This umbilical does not meet that standard. Please contact your Amron sales representative for an alternate spiral umbilical that can meet this standard.