TESCOM REGULATOR; PRESSURE REDUCING; 316 SS; 3/8 FNPT; INLET 10,000 PSIG; OUTLET 10-1500 PSIG; CV 0.06

• Test equipment
• Calibration stands
• Production equipment

• Can be easily converted to seven different outlet pressure ranges.
• Numerous inlet and outlet porting options.
• Unbalanced stem provides positive shut-off.
• Safety and reliability of piston sensor.
• Excellent sensitivity through a wide range of pressure settings.
• Vents to zero psig / bar in all pressure ranges.

• Maximum Inlet Pressure 316 stainless steel: 10,000 psig (690 bar)
• Maximum Outlet Pressure: 10-1500 psig (0.7-105 bar)
• Design Proof Pressure: 150% maximum rated
• Leakage: Bubble-tight
• Flow Capacity Standard: Cv = 0.06
• Inlet & Outlet Port Size: 3/8 inch NPTF
• Operating Temperature: -40°F to 165°F (-40°C to 74°C)

• Body Materials: 316 stainless steel
• Bonnet: 300 series stainless steel
• 40 Micron Filter: Stainless steel
• Seat Main Valve: Vespel®
• Seat Vent Valve: PCTFE
• Seals: Nitrile, Buna-N
• Back-Up Rings: PTFE
• Trim: 300 series stainless steel

• Cleaning: CGA 4.1 and ASTM G93
• Weight (without gauges): 5.5 lbs. / 2.5 kg

CAUTION: This product is cleaned in accordance with the intermediate level of ASTM-G93 and CGA-4.1 (The intermediate level assures removal of visible particles and combustible residues). System designers must verify the compatibility of the materials used in this product before installation and operation. Specification of materials for oxygen service is the user's responsibility. Consult an expert.

NOTE: Please refer to the 26-1100 Series Regulator Selection Tool page or the Tescom datasheet on the Resources tab to validate regulator selection.

NOTICE: This regulator should be serviced on a regular or annual basis under normal usage. For assistance in obtaining the correct soft goods or repair kit SKUs, please contact your Amron representative or email sales@amronintl.com