Stanley TP08013 Heavy Duty Hydraulic Trash Pump w/ 4 In. Discharge

Name: Stanley TP08013 Heavy Duty Hydraulic Trash Pump w/ 4 In. Discharge
Brand: Stanley
SKU: TP08013
Price: 3344.00 USD
Availability: InStock

SHIP NOW

SKU

TP08013

was $3,800.00 Sale Price $3,344.00

Restrictions / Notifications

No Free Shipping
This item does not qualify for free shipping.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Specs

More Information
	Application Pumping liquids with solids up to 4 in. Features The TP08 is a lightweight, heavy-duty pump capable of pumping high volumes of water, sand slurries, gravel, sludge, and solids up to 3 in./75 mm in diameter. Submersible, self priming and can run dry without damage to the motor, bearings, or impeller. Designed to get the most from an HTMA Type II hydraulic circuit. The TP08 will pump over 800 gpm/3,028 lpm at a 10 ft./2.54 m head. The free-flow impeller and 4 in./100 mm inlet and outlet combine to make the TP08 one of the most efficient pumps in the business. With its convenient handle, the TP08 can easily be handled by one operator. TP08 and the STANLEY® HP28 Power Unit make a powerful, portable team for high volume de-watering and trash pump applications. The TP08 features a fabricated, all steel volute and abrasion resistant cast iron impeller. The volute uses replaceable UHMW polyethylene wear plates to reduce wear and extend pump life. The heavy-duty STANLEY® HYREVZ™ hydraulic motor is self-lubricating. Specifications Capacity: 800 gpm / 3,028 lpm Weight: 59 lbs. / 26.7 kg Height (Over Handle): 16.5 in. / 42 cm Length: 19 in. / 48.3 cm Width: 15 in. / 38.1 cm Pressure: 2,000 psi / 140 bar Flow Range: 7 - 9 gpm / 26 - 34 Ipm Maximum Flow: 9 gpm / 34 lpm Porting: #10 SAE (press.) / #12 SAE (ret.) Connect Size and Type : 1/2 in. male pipe (press.) / 3/4 in. male pipe (ret.) Discharge Diameter: 4 in. camlock Inlet Diameter: 4 in. / 100 mm When hydraulic hose exceeds 100 ft. (30.4 m) in length, increase I.D. of both pressure and return hose. For more information, consult Stanley Hydraulic Tools. NOTE: Tool excludes hoses. See recommended Accessories at bottom of page.

Information

The Stanley TP08 Heavy Duty Trash Pump is used for dewatering, dredging, cleaning and as a effective bilge pump. The gear motor is direct drive to the cast iron impeller with easy access for clean out of the fabricated steel volute.

The Stanley TP08 Heavy Duty Trash Pump has been designed to get the most from an HTMA Type II hydraulic circuit. Using only 9 gpm/34 lpm of hydraulic flow, the TP08 will pump over 800 gpm/3,028 lpm at a 10 ft/2.54 m head. The free-flow impeller and 4 in./ 100 mm inlet and outlet combine to make the TP08 one of the most efficient pumps in the business.

Weighing only 59 lbs/27 kg and with its convenient handle, the Stanley TP08 Heavy Duty Trash Pump can easily be handled by one operator. The Stanley TP08 Heavy Duty Trash Pump and the Stanley HP1 Compact Power Unit make a powerful, portable team for high volume de-watering and trash pump applications.

The heavy-duty construction of the Stanley TP08 Heavy Duty Trash Pump features a fabricated, all steel volute and abrasion resistant cast iron impeller. The volute uses replaceable UHMW polyethylene wear plates to reduce wear and extend pump life. The heavy-duty Stanley HYREVZ™ hydraulic motor is self-lubricating.

Routine maintenance for the Stanley TP08 Heavy Duty Trash Pump is easy. The top cover is attached to the volute with six wing nuts so cleaning and inspection can be accomplished in just a few minutes.

Note: In an effort to improve portability and ease of use, modifications have been made to all TP03 and TP08 model trash pumps. For both pumps a quick link clip (p/n 73577) and carrying handle (p/n 73576) were added and connected to the eyelet located on the top plate. The rounded handle allows for increased comfort while carrying when compared to the previous square handle. With the clip feature, the handle can be removed to allow for large crane hooks to attach to the eyelet. In addition, the color of the TP03 urethane bowl has been changed from black to yellow. This change was made to increase pump visibility while operating in murkier substances or liquids.

The STANLEY® TP08 Trash Pump is a lightweight, heavy-duty, submersible pump capable of handling high volumes of water, sand slurries, gravel, sludge, and solids up to 3 in./75 mm. It's self-priming, can run dry without damage, and uses just 9 gpm/34 lpm of hydraulic flow to pump over 800 gpm/3,028 lpm at a 10 ft./2.54 m head. Weighing 59 lbs./27 kg, it’s easy for one operator to handle, with durable construction featuring a steel volute, abrasion-resistant cast iron impeller, and UHMW polyethylene wear plates. Paired with the STANLEY® HP28 Power Unit, it’s perfect for high-volume dewatering and trash pump applications.

Resources