Request a Quote

Please fill out the following form below.

Stanley Tools SK58310 Hydraulic Underwater Sinker Drill - I Inch Shank (Includes Hose Whips - Excludes Couplers)

SKU: SK58310 Rate this product

List Price: $5,080.00

$4,826.00

Availability: 1 In Stock. Usually ships in 7 weeks if not in stock.

Restrictions / Notifications

  • No Free Shipping
    This item does not qualify for free shipping.

Click to Enlarge Image

Overview

Application:

  • Underwater drilling in conrete, rock and masonry

Features:

  • Uses air flushing to clear holes of debris
  • Easy start feathering trigger
  • Direct drive rotation motor
  • Quick Disconnect Couplers are sold separately. (For couplers, please purchase 1 set of P/N: 03971 Quick Disconnect Couplers)

Specifications:

  • Capacity: 1 in. Hex x 4-1/4 in. Shank
  • Performance: 3 in. x 20 ft. Deep Hole
  • Flow Range: 7 - 9 gpm (26 - 34 lpm) at the commercial diver
  • Pressure: 1500 - 2000 psi (105 - 140 bar)
  • Porting: -8 SAE O-Ring (H), 1/2 in. NPT (A)
  • Weight: 67 lbs (30 kg)
  • Length: 26 in. (66 cm)
  • Width: 18 in. (46 cm)
  • Connection: 3/8 in. Male NPT Hose End
  • Hyrevz™ motor

* (H) = Hydraulic (A) = Air

Stanley Hydraulic Underwater Sinker Drill SK58 - P/N: SK58310 Includes:

  • (2) 12 in. Pigtail Hose whips (All tools require 2) - P/N: 01652
  • (1) Air Hose Whip with a 3/8 in. quarter turn valve
  • User Manual
Description

The Stanley Hydraulic Underwater Sinker Drill SK58 is designed to be used by commercial divers for underwater heavy-duty utility construction, blast hole drilling, and dowel drilling. The Stanley Hydraulic Underwater Sinker Drill SK58 is available for underwater use but can be used on land as well.

The Stanley Hydraulic Underwater Sinker Drill SK58 comes with hose whips and an air hose whip with a 3/8 in. quarter turn valve. Quick disconnect couplers are sold separately.

The Stanley Hydraulic Underwater Sinker Drill SK58 uses air flushing to clear holes of debris. The Stanley Hydraulic Underwater Sinker Drill SK58 features an easy start feathering trigger and a direct drive rotation motor for reliable service and fast and easy starting.

The rotation is independent of impact rate and is adjustable between 0 and 300 rpm. The Stanley Hydraulic Underwater Sinker Drill SK58 can drill up to a 3 in. (75 mm) diameter hole up to 20 ft. (6 m) deep.

*Please reference the ATTACHMENTS tab for downloadable and printable files on this underwater tool.

FAQ
 

Product FAQ's

Ask a Question

  • What is the recommended air pressure to operate the air flushing feature on my SK58 Sinker Drill?

    The minimum recommended air pressure is 75 PSI at 15 CFM. As the diver descends you will have to increase your psi to compensate for bottom pressure. Maximum operating pressure at the tool is 120 psi at 30 cfm.

    How helpful was this information?

  • Is it possible to order the SK58310 with a 7/8" neck rather then a 1" neck?

    The SK8310 can not be ordered with the 7/8" neck. However, you can order the 7/8" neck as a spare part and make the change yourself if you have a trained technician on staff. The main disadvantage to going this route is the 7/8" neck part number 5195 is made of steel and will rust.

    How helpful was this information?

  • Will my tool operate if I use a lower flow rate than what would be considered optimum for the tool to operate?
    Yes, most tools have an optimal flow range, as long as the gallons per minute delivered to the tool is within this range the tool will work. However, please be award that the tool will run at a slower speed based on the flow rated delivered to the tool. Basically, the lower the gallons per minute the slower the tool will run.
    How helpful was this information?

  • Do any of the Stanley hydraulic tools ship full of hydraulic oil?
    No, but the factory normally will leave a little fluid inside the tool to help lubricate the internal components during storage.
    How helpful was this information?

  • What is the maximum depth I can operate my SK58 Hydraulic Sinker Drill?
    The maximum depth limit is 500 feet. A stock tool is able to operate at 100 feet without any modification. However, beyond the first 100 feet, for every additional 100 feet of water, the tool requires you to increase the accumulator PSI by an additional 40 PSI. The accumulator is pressurized to 600 psi standard.
    How helpful was this information?

ATTACHMENTS

Customers Who Bought This Item Also Bought