×

:

Not a valid Time
This is a required field.
This item is no longer available. We have updated this item.
x
  • See item number HP8BD for the improvements made.

Stanley GT18B02 GT Hydraulic Power Unit - 5 or 8 gpm Output Capacity REFERENCE ONLY

SKU
OBS-GT18B02
$0.00

The GT18B02 has been replaced to Model Number HP8BD

The GT18B02 GT Hydraulic Power Unit is small and compact and features a single 5 or 8 gpm tool circuit.

More Information

The GT18B02 has been replaced to Model Number HP8BD

Application:

  • Designed to provide power for underwater hydraulic tools requiring a single 5 gpm up to 8 gpm

Features:

  • All electric control system with rotary switches
  • All components are assembled for easy routine servicing
  • Upper frame can be removed for more serious servicing
  • Quartz hour meter in the control panel records engine run time
  • The hydraulic pump is mounted directly to the engine eliminating any misalignment and ensuring long life of the drive coupling
  • In-tank hydraulic filter continuously cleans the hydraulic fluid and assures that refill fluid passes through the filter for a clean refill
  • 35-Ah sealed, non-spillable, no-maintenance battery is located inside a covered compartment
  • Pressure lubrication system with a pressure sensing switch that will shut down the engine if engine oil level is too low
  • Some models are available with 110 VAC, 60 Hz electric power provided by a Briggs and Stratton PowerLink inverter system
  • System will deliver 1000 Watts, continuous and 1500 Watts intermittent power through GFCI (Ground Fault Circuit Interrupter) receptacles

Specifications:

  • Output Capacity: 5 or 8 GPM (20 or 30 LPM)
  • Pressure: 2000 PSI (140 bar)
  • Circuit Type: Open Center
  • Hydraulic Reservoir Capacity: 3 gallons (11 liters)
  • Fuel Tank Capacity: 7 gallons (26.5 liters)
  • Weight (Wet): 330 lbs (150 kg)
  • Dimensions: 35 in. L x 21.5 in. W x 29 in. H (89 cm L x 54.6 cm W x 73.7 cm H)
  • Engines: Briggs and Stratton 18 Horsepower Vanguard

The GT18B02 has been replaced to Model Number HP8BD

The GT Series of Stanley Hydraulic Power Units are designed for continuous duty operation with an efficient oil cooler as standard equipment.

The GT18B02 GT Hydraulic Power Unit is a small compact hydraulic power unit designed to provide power for underwater hydraulic tools requiring a single 5 gpm up to 8 gpm. The Stanley GT18B02 Hydraulic Power Unit is powered by a Briggs & Stratton industrial grade engine. Folding and locking handle, electric start, auto throttle, pressurized engine lubrication, and large pneumatic tires are standard equipment.

FAQ's
Will my tool operate if I use a lower flow rate than what would be considered optimum for the tool to operate?
Yes, most tools have an optimal flow range, as long as the gallons per minute delivered to the tool is within this range the tool will work. However, please be award that the tool will run at a slower speed based on the flow rated delivered to the tool. Basically, the lower the gallons per minute the slower the tool will run.
Does the GT18 Hydraulic Power Unit ship with hydraulic oil?
Yes, it ships with roughly 7/8 of a full tank.
Amron International Customer Service
We respond to most inquiries within 24 hours, Monday – Friday, excluding holidays.
Phone
Toll-Free: (877) 462-6700
Local & International: (760) 208-6500
Fax: (760) 599-3857
Email
sales@amronintl.com
Hours of Operation
Customer Service
Monday - Friday, 8am – 5pm Pacific Time Zone

Warehouse/Will Call Orders
Monday – Friday, 9am – 3:30pm Pacific Time Zone