Nuvair Pro Carbon Monoxide (CO) Alarm Analyzer - Panel Mount

Only %1 left

SKU

NUV-9624

As low as $773.00

Nuvair's Pro Carbon Monoxide (CO) Alarm Analyzer - Panel Mount NUV-9624 is designed for installation on a compressor control panel or other flat surface, the Nuvair Pro CO Alarm panel mount analyzer measures carbon monoxide levels in breathing gas mixtures or air. Audible and visual alarms for low and high carbon monoxide content can be set by the user. If the alarm sounds, the analog output can activate an optional relay that shuts down compressors automatically, sounds a remote alarm, or activates an emergency backup system.

Restrictions / Notifications

CA PROP65
Warning: Cancer and Reproductive Harm www.p65warnings.ca.gov
MSDS
Safety Data Sheet available online or by request.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Specs

More Information
	Features: Audible and visual alarms for low and high carbon monoxide content can be set by the user. The analog output can activate an optional relay that shuts down compressors automatically. Designed for installation on a control panel or other flat surface for flush mounting. Continuous monitoring of carbon monoxide contaminants in the system. Connects in-line to high or low-pressure compressors. Equipped with audible and visual alarms. Four power options available. Emergency backup system. Specifications: Flow Rate: 0.5-1 L/min Resolution: 1 ppm Repeatability: <+5% Acccuracy: ±5% Sensor Type: Electrochemical Expected Sensor Life: >24 months in normal use from date of manufacture. Range: 0-50 ppm CO Alarms: Two user-programmable audible and visual alarms. Response Time: <50 seconds over complete temperature range. Storage Temperature: 14° to 140°F (-10° to 60°C) Dimensions: 4 in. L x 2 in. W x 5.5 in H Weight: 9 oz. (0.3 kg) Operating Temperature: 14° to 122°F (-10° to 50°C) continuous -4° to 122°F (-20° to 50°C) intermittent Operating Humidity: Non-condensing: 15-90% Continuous; 0-99% intermittent Power Options: 9 Volt Battery Rechargeable Lithium Battery Wall Plug-in [International] 12 Volt DIN Rail Replacement Sensor: Replacement Sensor Model 33 fsc 200 ppm - for Pro Carbon Monoxide (CO) *WARNING: Never expose gas sensors to pressure or you may cause damage and/or false readings. Damaged sensors will not provide accurate gas analysis. Most gas analyzers can be used to analyze a regulated gas sample flow, the contents of a gas cylinder, or the flow from a regulator. The flow rate of gas must equal 1-5 L/min. To produce this flow, a Flow Restrictor and Regulator may be required. A faulty Flow Restrictor can lead to a false analyzer reading. Flow Restrictors should be regularly tested with a Flow Meter. Inaccurate gas analysis can lead to serious personal injury or death.