Amron Two-Diver Communicator for AMCOMMAND II Two-Diver Air Control REFERENCE ONLY
List Price: $1,620.00
This item number has been replaced by 2825A-05
This item number has been replaced by 2825A-05
Features:
Specifications:
Accessories:
Tech Note: All communicators will transfer topside noise to the diver when using the radio speaker only. To eliminate background noise and achieve clear concise communications, use a Push-to-Talk microphone, headset, or a Remote Walk-and-Talk with a headset Note: Amron reserves the right to change the battery brand at any time without notice. |
This item number has been replaced by 2825A-05
The Amron International Amcom ™ II Model 2825A-8225 Two-Diver Communicator is the most versatile and powerful two diver communicator on the market today. The most unique feature is the design of separate channels and volume controls for each diver and the tender, both for the uplink and the downlink paths. Each diver may have different equipment such as microphones and speakers or different listening and speaking characteristics. You can set the volume for each diver and tender to their individual comfort level. Both divers can be set up on 2-wire and/or 4-wire mode, or one diver on 4-wire mode and the other on 2-wire mode or any combination of the two modes.
2 and 3 Year Extended Warranties are available for this product. Please refer to the Attachments tab for further information on the warranty programs.
Note: Amron reserves the right to change the battery brand at any time without notice.
Note: Speaker, panel microphone and external charger NOT included.
ATTACHMENTS
FAQ's
If the unit is plugged into a live outlet and turning on the switch does not cause the AC POWER LED to light up, then the fuse(s) are probably blown. Unplug the unit from the outlet, remove the fuses and check continuity with a multimeter. Replace any fuse that does not show continuity.
Although it may be possible, we strongly discourage such operation. The added workload would cause overheating and stress to the amplifier card. Prolonged use in this condition will eventually cause permanent damage and failure to the amplifier card.
When operating your Amron Diver Communicator on AC, it is critical to use a Ground Fault Circuit Interrupter (GFCI) or isolation transformer for tender and diver safety. Surges and spikes are common on AC lines found on ships, generated locally, or at the end of long extension cable runs and can exceed 1kVolt. Such surges and spikes can cause the fuse to blow on the amplifier card assembly. The power supply is designed so that such a failure will be isolated and will not cause a safety issue to the tender or divers. It is strongly advised that your Amron Diver Communicator be operated on an AC circuit with a high quality surge arrester or an AC isolation transformer.
Amron International Customer Service
We respond to most inquiries within 24 hours, Monday – Friday, excluding holidays.Phone
Toll-Free: (877) 462-6700Local & International: (760) 208-6500
Fax: (760) 599-3857
Hours of Operation
Customer ServiceMonday - Friday, 8am – 5pm Pacific Time Zone
Warehouse/Will Call Orders
Monday – Friday, 9am – 3:30pm Pacific Time Zone
