Amron 4-Diver Portable Military Version Communicator with Internal Charger REFERENCE ONLY

This item number has been replaced by 2840A-05

Features:

• Volume setting for each diver and tender to their individual comfort level
• All divers can be set up on 4-Wire Mode or 2-Wire Mode or any combination of the two modes
• Ability to use both dynamic and pre-amplified diver microphones with a unique circuit that detects microphone type and automatically adjusts volume levels
• Weatherproof panel microphone for greater voice intelligibility
• Communicator can be left on charge indefinitely without damage to the batteries or communicator
• Communicator can be operated directly from the charger where AC power is available

Specifications:

• Input Impedance (Each Input): 250 Ohms
• Common Mode Rejection: 40 dB Minimum
• Current Drain:
• Maximum Full Volume 3 Amps
• Minimum Quiescent 250 mAmps
• Output Impedance: 4 Ohm
• Audio Power Output: 20 Watts per channel
• Frequency Response: 300 to 10,000Hz
• Power Supply Voltage: 12 VDC Nominal (9 Volts Minimum - 18 Volts Maximum)
• AC Voltage Range: 90-264 VAC, 47-440 Hz
• Sensitivity (input): 0.5 mV
• Dimensions: 11 in. H x 13 in. W x 17 in. L (27.9 cm x 33 cm x 43.2 cm)
• Weight: 21 lbs. (9.98 kg)

Amcom ™ IV 4-Diver Portable Military Version Communicator with internal Charger - P/N 2840A/24-MS Includes:

• (1) Hand-Held Push-to-Talk Microphone - P/N: 2405-28
• (1) 12VDC Slide Terminal Gel-Cell Rechargeable Battery - P/N: 2890-05 - Expected life: 10 Hrs.
• (1) User Manual

Tech Note:

All communicators will transfer topside noise to the diver when using the panel microphone only. To eliminate background noise and achieve clear concise communications, use a Push-to-Talk microphone, headset, or a Remote Walk-and-Talk with a headset.

Note: Amron reserves the right to change the battery brand at any time without notice.