The entire Divator MK II SCUBA has a CE-approval - All parts of the breathing circuit is tightly integrated
Positive Pressure Regulator - The positive pressure regulator is designed to have a slight positive pressure in the mask. This pressure is used to keep contaminated water out of the mask. This style mask is typically used when diving in contaminated water
Close fitting design - Excellent for diving in confined spaces
Main parts have finger-tight fittings - Easy to operate and maintain in field
Silent operational mode - Communicate without noise interference
Low volume dead space facemask - Reduces the re-inhalation of CO²
Fit spectacles, communication devices and add-ons - Flexibility for different divers and diving operations
Optimum performance from the Arctic to the Equator - An out of the box configuration works in -30°C to +70°C
Soft and flexible sealing prevent leakage
The balanced Divator Mask breathing valve is one of the best-tested breathing valves available. The breathing valve will perform even under the most extreme conditions: mud, oil, and fast flowing cold currents does not have a serious impact on the performance
The mask is equipped with retainers for goggle frames and it is prepared for underwater communication
The standard Divator Mask is equipped with easily adjusted push pads for pressure equalizing of ears and spoilers to prevent mist from being formed on the visor.
The Divator Mask is very easy to drain from water filling, simply press one button and hold the lower part of the face mask out from the face.
Maintenance:
Breathing apparatus from Interspiro is an investment with a long service life, when properly maintained. To simplify service and to obtain maximum product performance we recommend using Interspiro service kits, containing original spare parts necessary for preventive maintenance.
**Mask does not include Ambient Air Hatch (Ambient Breathing Valve)**
Note: LP Hose Whip Sold Separately
Features
This mask is suited for even the most extreme of conditions: mud, oil, and fast flowing cold currents, and it does not have a serious impact on the performance.
The breathing valve is balanced and maintain extremely low breathing resistance at all diving depths.
In the inhalation channel there is a one-way valve to prevent water from penetrating into the valve mechanism where it could freeze and cause the valve to stick in the open position.
The low volume visor reduces the positive buoyancy generated from air inside the mask and the inner mask design minimizes “dead space” and re-inhalation of CO2.
Easy to drain from water by using the purge button on the breathing valve.
Mask is equipped with retainers for spectacle inserts, and it is prepared for underwater communication.
The DIVATOR Full Face Mask is the Worlds most sold full face mask for diving. The balanced DIVATOR breathing valve is one of the best-tested breathing valves available.It will perform even in the most extreme of conditions: mud, oil, and fast flowing cold currents does not have a serious impact on the performance.
The low volume visor reduce the positive buoyancy generated from air inside the mask. Low volume “dead space” reduces re-inhalation of CO2.
The DIVATOR Full Face Mask is very easy to drain from water filling, simply press one button and hold the lower part of the face mask out from the face.The mask is equipped with retainers spectacle inserts and it is prepared for underwater communication. The communication capabilities are enhanced by the airflow design that considerably reduces turbulence noise.
The Divator Hatch consists of the ambient breathing valve mounted on the visor, the visor is hard coated and antifog prepared. The Divator Hatch is an easy-to-use enhancement to the Divator Mask.
The Divator Hatch is attached to the side of the Divator Mask – not interfering with the field of vision – and gives the diver ambient air while on stand-by or at surface level. The Divator Hatch is designed with Interspiro's safety innovation pedigree. The Hatch is easy to operate: pull to open and push to close.
The Divator Hatch has a small form factor and will not hamper the diver above or under water. The design of the breathing valve keeps the breathing resistance extremely low. Ambient breathing will not only increase cylinder duration time but will enable the diver to keep the face mask donned while on
stand-by. Divator Hatch is a perfect complement to the Divator full face mask for professional divers.
Note: LP Hose Whip Sold Separately
The divator breathing valve is one of the best-tested breathing valves available. It will perform even in the most extreme of conditions: mud, oil, and fast flowing cold currents does not have a serious impact on the performance. The breathing valve is balanced and maintain extremely low breathing resistance at all diving depths even if variations occur in the secondary pressure. The combination of high air flow capacity and low breathing resistance increases the diver's performance and endurance.
In the inhalation channel, there is a one-way valve to prevent water from penetrating into the valve mechanism where it could freeze and cause the valve to stick in the open position.
The low volume visor reduces the positive buoyancy generated from air inside the mask and the inner mask design minimizes “dead space” and re-inhalation of CO2.
It is easy to drain from water by using the purge button on the breathing valve.
The mask is equipped with retainers for spectacle inserts, and it is prepared for underwater communication. The communication capabilities are enhanced by the airflow design that considerably reduces turbulence noise.
The rubber head harness has five straps that are tightened and locked by stainless steel buckles. The wide and soft sealing edge of the mask is pressed lightly against the face and follows the contours of the face, giving an effective seal.
The divator breathing valve is available with safety pressure or with normal pressure. The safety pressure is turned on automatically when the user takes his first breath in the mask. The safety pressure reduces the risk of inward leakage of water (or air at surface) and is very important when diving in contaminated water. The safety pressure in the mask is maintained regardless of the diver's air consumption rate.
Amron Bone Conducting Earphone & Microphone Assembly w/ 4-Pin WP Connector Complete - Version A WiringSKU: 1406ASHIP NOW$585.00
Amron 32 in. Hose Assembly for AGA Divator MK II Full Face MaskSKU: LP5-AGAF-3824M-32SHIP NOW$50.00
