×

:

Not a valid Time
This is a required field.

WA Hammond Model 207 Compressed Air Drier (Incl. Cartridge & Bowl Guard)

SKU
50207
$281.32
Eligible for Free Shipping Over $125
More Information
Specifications
  • Includes cartridge and bowl guard
  • Construction: Polycarbonate bowl with anodized aluminum head
  • Dimensions:
    • 207 Drier: 4 1/2 in. dia. x 13 3/4 in.
    • Cartridge: 2 11/16 in. x 10 in.
  • Maximum Pressure: 125 psig
  • Connection: 1/4 in. NPT
  • Desiccant: DRIERITE disposable cartridge #40207
  • Water Capacity: 0.2 lb. water vapor
  • Maximum Flow Rate: 10 scfm for short periods or 5 scfm for extended use

 

Notes
  • Do not use this drier in the presence of vapors or liquids containing phosphate esters, synthetic lubricants, hydrocarbon solvents, methanol, acetone, lacquer solvents, or other organics.
  • The use of a bowl guard is recommended when the possibility of physical damage or chemical attack exists. The guard helps to protect the bowl and reduces the possibility of injury in the event of a system malfunction.

The Model 207 Compressed Air & Gas Drier will dry up to 10 scfm of air or gas saturated at 90° F and 125 PSIG to a dew point of -100° F for intervals of 20 to 30 minutes. The drier will dry gas flows up to 5 scfm continuously. The disposable cartridge has an indicator window that turns from blue to pink when the cartridge is exhausted. The cartridge is easily replaced by depressurizing the drier and unscrewing the polycarbonate bowl from the aluminum head. The compressed air enters the DRIERITE Model 207 Compressed Air Drier through a port on the left side of the head and passes downward between the cartridge and the bowl and beneath the cartridge where condensed water is trapped. The air then passes upward through the cartridge, which contains Du-Cal DRIERITE and Indicating DRIERITE, and is dried to -100° F. The air exits the drier through a port on the right side of the head. Water that is trapped below the cartridge must be periodically removed by opening the condensate drain valve.

 

Notes
  • Do not use this drier in the presence of vapors or liquids containing phosphate esters, synthetic lubricants, hydrocarbon solvents, methanol, acetone, lacquer solvents, or other organics.
  • The use of a bowl guard is recommended when the possibility of physical damage or chemical attack exists. The guard helps to protect the bowl and reduces the possibility of injury in the event of a system malfunction.
Amron International Customer Service
We respond to most inquiries within 24 hours, Monday – Friday, excluding holidays.
Phone
Toll-Free: (877) 462-6700
Local & International: (760) 208-6500
Fax: (760) 599-3857
Email
sales@amronintl.com
Hours of Operation
Customer Service
Monday - Friday, 8am – 5pm Pacific Time Zone

Warehouse/Will Call Orders
Monday – Friday, 9am – 3:30pm Pacific Time Zone