Viking HDS Suit with Surveyor Latex Hood

Industries:

• Law Enforcement
• Commercial Diving
• Shipping
• Defense

Applications:

• Nuclear pond inspection
• Cleaning ship Hulls
• Clearing a fouled propeller
• Welding and Inspection
• Inshore Diving
• Military Diving

HDS Features:

• Highly resistant to aggressive chemicals including hydrocarbons
• Internal seams stitched and taped for security
• 5 times more abrasion resistant than the VIKING™ PRO material
• External seams vulcanized for peace of mind
• Easy to clean and repair
• Available in 18 sizes:
  • Standard: Small to 3XL
  • Wide: Medium to 3XL
  • Double Wide: Small to 3XL
• Rear entry

Specifications:

• Surveyor Latex Hood
• Standard with Suspenders
• Carry Bag
• Suit Manual
• Repair Kit
• Zip care materials
• Neck Seal: Fitted with a Surveyor latex neck seal as standard. (please see note below)
• Zipper: Heavy Duty (HD) non-magnetic; 90 cm long; placed across the shoulders. The zipper is gas and watertight.
• Cuffs: Latex PRO cuffs are the standard fitment.
• Footwear And Attachments: The standard boot is an extension of the leg, with a heavy duty flexible HDS rubber outsole stitched and taped to
  the end. The outsole features a non-slip surface for grip. The heel has a fin strap retainer.
• Valves:
  • Standard configuration, mounted on rubber backing discs:
    • VIKING™ Hazmat inlet valve, positioned centrally on the chest
    • Hose: 80 cm long; CEJN fitting
    • VIKING™ X2 exhaust valve, placed on the upper left arm

Material:

• NITECS material, which is an HNBR rubber compound.

Seams:

• External: Vulcanized with a 25 mm rubber tape.
• Internal: Stitched and taped

 Reinforcements:

• NITECS reinforcing material with a textured non-slip surface is fitted to high wear areas, such as around the zipper and across the shoulders.
• The trouser reinforcement extends around the thighs down to the knees and down the front of the legs and over the boots.

Color:

• Black

Standards:

• EN 14225-2:2005
• HZ chemical approval
• BIO micro-organism approval

Country of Origin:

• Lithuania

Notes:

• Hood Options VIKING™ HDS suits MUST be fitted with a hood for diving in contaminated water conditions.
  We recommend the Magnum HDS Hood, which is made from the same material as the suit.

• Option: VIKING™ Quick Neck system, which allows for quick changing of broken seals.
  Yoke Options Full range of rubber helmet yokes made from NITECS material to match the suit, including: SL27/37/47 etc, AH3/5,
  Desco, Deepsea, Genesis, Gorski and Dräger.

• Options: HDS rubber cuff ring system or the VIKING™ Bayonet Ring System. Both systems make the fitment of latex
  or rubber gloves possible.