SCUBAPRO Universal Tool

Warning: this is an emergnecy tool to be used by an authorized SCUBAPRO technician only, or by a trained individual when strictly following the assemblying/dismantling procedure and limits (torque, etc.)

This tool performs thirteen different functions:

1. Removes low pressure (P/N 01.3xx.0xx) hose/housing nut (P/N 11.755.120)
2. Adjusts spring retainers MK17/MK16/MK18 (P/N 10.705.114), MK18 U.L. (P/N 10.755.114). Removes MK17 balance chamber (P/N 10.117.102) and removes current tank valve DIN/INT adapter (P/N 14.029.104).
3. Removes all first stage caps and rings (MK25's, MK18's, MX16, MK2, MK15/20, MK14, MK10).
4. Removes MK14 balance chamber (P/N 10.705.102).
5. Removes X650's, S600's, S550, R390, R380, D400, G500 case ring and R290 case cover.
6. Removes D400 retainer (P/N 11.011.117). MK15 seat retainer (P/N 10.600.106).
7. Adjusts second stage orifice (P/N 11.500.109). Removes old DIN/INT tank valve adapter and MK20/U.L. seat retainers (P/N 10.700.102 & 10.715.102).
8. Removes R390, R290, R380, R190 plug (P/N 11.190.104).
9. Removes seat retainers MX10/MK10 Plus (PN 10.101.106, 10.101.162), and D400 cap (P/N 11.011.126).
10. Removes G250, G200, R190, M50 covers (P/N 11.250.222, 11.200.101, 11.300.038, 11.370.029).
11. Removes S600's ring/frame assy (P/N 11.600.040, 11.610.040).
12. Removes high and low pressure port plugs (P/N 10.101.139, 10.760.139, 10.770.104 & 10.101.104, 10.715.101, 10.760.104, 10.770.103) and adjusts MX25's seat adjust. screw (P/N 01.102.104).
13. Adjusts the R290 Flow Vane (P/N 11.290.011).

Note - The handle (h) protects your hand from the pins, when this section of the tool is not used: to insert it proceed as shown in fig. 2.