TESCOM Pressure Reducing Regulator 316 SS, 4500 PSIG Inlet, 0-300 PSIG Outlet, 3/4 IN. BSPP, 3/8 IN. CV 2.0

• Commercial diving - breathing air
• Special gas mix regulation hard suit diving
• High pressure tube trailer gas reduction

• Large piston sensor gives excellent sensitivity.
• Balanced valve design ensures stable downstream pressure.
• Large hand knob provides fast low-torque pressure settings.
• Venting is standard (Except: Part numbers ending in -002 & -019).

• Material: 316 stainless steel
• Maximum Inlet Pressure: 4500 psig / 310 bar
• Outlet Pressure Range: 0-300 psig / 0-20.7 bar
• Port Type: BSPP
• Port Size: 3/4 in.
• Main Valve: 3/8 in. Cv = 2.0
• Leakage: Bubble-tight
• Operating Temperature: 1-15°F to 220°F / -26°C to 104°C
• Seat, Main Valve: PCTFE (Except: 44-13X2-XXX2, PTFE)
• Seat, Vent Valve:
  • PTFE: 300 and 600 psig / 20.7 and 41.4 bar outlet
  • PCTFE: 1000 and 1500 psig / 69.0 and 103 bar outlet
• O-Rings: FKM (Viton®)
• Back-up Rings: PTFE
• Gaskets: PCTFE

CAUTION: This product is cleaned in accordance with the intermediate level of ASTM-G93 and CGA-4.1 (The intermediate level assures removal of visible particles and combustible residues). System designers must verify the compatibility of the materials used in this product before installation and operation. Specification of materials for oxygen service is the user's responsibility. Consult an expert.

NOTE: Please refer to the 44-1300 Series Regulator Selection Tool page or the Tescom datasheet on the Resources tab to validate regulator selection.

NOTICE: This regulator should be serviced on a regular or annual basis under normal usage. For assistance in obtaining the correct soft goods or repair kit SKUs, please contact your Amron representative or email sales@amronintl.com.