Stanley GR3070101 Hydraulic Grinder OC/CC Dry 9 inch - CE Certified

The Stanley GR30 Grinder is used for top, face, and side grinding using 9 inch (228.6 mm) diameter wheels. Wire brushes can also be used and depressed-center wheels with an optional adapter.

Application:

• Grinding

Features:

The integral Stanley Hyrevz gear motor is manufactured to exacting standards to deliver maximum efficiency. The over-sized motor run-down valve allows the motor to freely run down in speed when the grinder is turned off ensuring that a properly installed wheel will not spin off the spindle. The built-in reverse-check valve in the handle prevents operating the grinder when reverse-plumbed to the hydraulic system. The Stanley dual-spool selector is accessible under a seal plug at the rear of the tool.

Specifications:

• Capacity: 9 inch
• Weight: 12 lbs
• Length: 8 inch
• Width: 12.5 inch
• Hydraulic Pressure:1000-2000 PSI
• Input Flow Range: 7-9 GPM
• RPM: 5600 RPM @ 8 GPM
• Optimum Flow: 8 GPM
• Porting: -8 SAE O-Ring
• Connect Size & Type: 3/8 inch Flush Faced
• Motor: Integral STANLEY Hyrevz Gear Motor
• Max Pressure: 2000 PSI