Stanley CO23341 Hydraulic Underwater Cut-Off Saw - 10 Inch Wheel (Includes Hose Whips - Excludes Cut-Off Saw & Couplers)

Name: Stanley CO23341 Hydraulic Underwater Cut-Off Saw - 10 Inch Wheel (Includes Hose Whips - Excludes Cut-Off Saw & Couplers)
Brand: Stanley
SKU: CO23341
Price: 3546.90 USD
Availability: InStock

SHIP NOW

SKU

CO23341

List Price: $3,941.00

was $3,842.48

List Price: $3,941.00

Sale Price $3,546.90

The Stanley Hydraulic Underwater Cut-Off Saw CO23 is a lightweight and powerful saw which is ideal for accurate dimensional cutting of concrete, masonry, pipes, structural steel beams, and guardrail in underwater applications.

Restrictions / Notifications

No Free Shipping
This item does not qualify for free shipping.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Specs

More Information
	Application: Cutting Medals Cutting Concrete Features: 10-15 gpm (38-57 lpm) operating range Adjustable depth shoe plate 3 in. (76.2 mm) deep maximum cut Wheel guard Integral HYREVZ™ gear-type motor Safety trigger Specifications: Output Capacity: 10 in. wheel (25.4 cm wheel) Input Flow Range: 10-15 GPM (38-57 LPM) Input Pressure: 1500 - 2000 PSI (105 - 140 bar) Optimum Flow: 15 GPM (57 LPM) Weight: 23 lbs. (10.4 kg) Dimensions: 19-1/2 in. L x 11 in. W (49.5 cm x 27.9 cm) Motor: HYREVZTM Gear Porting: 8 SAE O-Ring Connect Size and Type: -8 SAE Threaded Ports Stanley Hydraulic Underwater Cut-Off Saw CO23 - P/N: CO23341 Includes: (2) 12 in. Hose Whips (All Hydraulic Tools Require 2) - P/N: 01652 User Manual

Information

The Stanley Hydraulic Underwater Cut-Off Saw CO23 was designed for underwater use but it is also a very useful tool on land as well. The CO23 uses standard 10 in. (25.4 cm) diameter abrasive or wet or dry diamond blades for cutting metals or concrete. Stanley Tools P/N: 03971 Coupler Set for the Hydraulic Underwater Tools and cutting wheel are sold separately.

*Please reference the ATTACHMENTS tab for downloadable and printable files on this underwater tool.

Resources

ATTACHMENTS

2011 Amron International Catalog - Page 246

(Size: 114.5 KB)

Hydraulic Tool to Hydraulic Hose Attachment

(Size: 30.5 KB)

Stanley CO23 Cut-off Saw Accessories

(Size: 579.6 KB)

Stanley CO23 Cut-off Saw Blowapart and Key

(Size: 744.2 KB)

Stanley CO23 Cutoff Saw Spec Sheet

(Size: 165.6 KB)

Stanley CO23 Cutoff Saw User Manual 02-22 VER 16

(Size: 641 KB)

FAQ's

My CO23 has an alignment pin but my cutting wheel doesn't have an alignment hole so I can't attach my cutting wheel. Can I remove the alignment pin?

The CO23 U/W saw was designed with a pin installed on the inside drive collar of the tool. If you are using a cutting wheel with a hole for the drive collar pin, you will install the wheel to fit over this pin.

If you have a cutting wheel without a hole for the drive collar pin, you will need to remove the pin from the drive collar before installing the wheel. You should be able to remove the pin from the drive collar with a pair of vise-grips.

My CO23 has an alignment pin but my cutting wheel doesn’t have an alignment hole so I can’t attach my cutting wheel. Can I remove the alignment pin?

Is it possible to change the direction the blade rotates by reversing the flow of hydraulic fluid?

No, you cannot change the rotation of the tool by reversing the flow of hydraulic fluid. Doing this would be extremely unsafe and the risk of someone getting hurt is very high.

What is the deepest depth the CO23 Cut-Off Saw will cut?

Using a new 10 inch cutting wheel, the depth of the cut will be roughly 3.5 inches.

Will my tool operate if I use a lower flow rate than what would be considered optimum for the tool to operate?

Yes, most tools have an optimal flow range, as long as the gallons per minute delivered to the tool is within this range the tool will work. However, please be award that the tool will run at a slower speed based on the flow rated delivered to the tool. Basically, the lower the gallons per minute the slower the tool will run.

Do any of the Stanley hydraulic tools ship full of hydraulic oil?

No, but the factory normally will leave a little fluid inside the tool to help lubricate the internal components during storage.

Is there a handle extension kit available for the CO23?

Yes, please order part number 34175 extension kit.