Stanley Seal Kit 02032 for TA521, TA53 & 51HV

• 00175: O-ring 1/2 x 5/8 x 1/16 (2)
• 00669: Quad Ring 1/2 x 5/8 x 1/16 (2)
• 00830: SCL Rod Seal 3/4 x 1 Type A (1)
• 00831: Rod Wiper (1)
• 00834: O-ring 1 x 1 1/4 x 1/8 (1)
• 00940: O-ring 7/8 x 1 x 1/16 (1)
• 00941: O-ring 1 1/8 x 1 1/4 x 1/16 90D Buna (2)
• 29690: Oil Control Seal (2)
• 01262: O-ring 1 3/4 x 1 7/8 x 1/16 70D Buna
• 06533: O-ring 1.171 x 1.403 x .116 90D Buna
• 07242: Back-up Washer 3/4 x 1
• 07245: Rod Seal 3/4 x 1 x 1/8
• 07627: O-ring 5/8 x 3/4 x 1/16
• 08434: Felt Washer
• 14891: Seal 3/4 x 1 1/8 x 5/16
• 15016: Rod Wiper

NOTE: Clean exterior of the tool before disassembly. Replace all seals exposed during disassembly. Note orientation of seals before removing them. Install new seals in the same orientation. Lubricate all seals before installation.