Power Source: External stabilized 12-32V DC supply, (regulation < ±300mV)
Operating Current: Average 300mA at 24V DC supply
Fuses:
Monitor: Internal 2A slow blow micro fuse on monitor PCB:
Sensor and data ports: 400mA shutdown protection on +5V DC supply
Display Panel:
320 x 240 TFT color graphic display with 10 brightness levels
Displays current values of measured parameters using 14 mm high large characters
Alarm Indicators: Onscreen visual indication of faults and 2 fully adjustable alarm levels
Operator Controls:
2 x momentary action toggle switches for alarm and calibration functions
2 x momentary action push buttons for mute and function selection
1 x rotary encoder for value adjustment and menu navigation
Environmental Conditions:
Rating: IP22
Operating Temperature: 23 to 131° F (-5 to +55° C)
Storage Temperature: 14 to 158° F (-10 to +70° C)
Operating Pressure: 700 to 1300 mbar absolute
Humidity: 0 to 95% RH at 131° F (+55° C) non-condensing
Audio:
Speaker: 1W, used for user interface navigation
Buzzer: 88dB at 10cm, frequency 2400±400Hz, alarm and fault indication
Operational Life: The product is expected to achieve an operational life of at least 10 years with anticipated continuous usage for periods of 30 days in typical applications
MEC CO2 sensor
Power Source +5V DC 500mV
Operating Current CO2 Sensor: Maximum 390mA at +5V DC supply
Detection Mode Infra-red
Range and Accuracies 5000ppm CO2: 25ppm CO2, 1% of reading, 2.5ppm CO2 / C 10000ppm (1%) CO2: 50ppm CO2, 1% of reading, 5ppm CO2 / C
Response Time T90 in <30seconds
Warm Up Time 40 seconds
Communication Link RS485 serial data, 9600bps, no parity, 1 stop bit. Distance up to 500m
Environmental Conditions Rating: IP22 Operating temperature: -5 to +55°C Storage temperature: -10 to +70°C Operating pressure: 700 to 1300 mbar absolute Humidity: 0 to 95% RH at +55°C non-condensing
Dimensions Panel: 2081g Sensor Life 5 years in operation
Remote sensor gas flow rate 0.2 to 1.0 liters/minute Maximum sample input pressure 6bara
Optional Accessories:
AC-DC +24VDC Panel Mounted Power Supply Unit (PSU)
Analox SDACBDNXA SDA Monitor and Carbon Dioxide (CO2) Module, Combined Panel, Configured for CO2 0-2% 24VDC
The SDA carbon dioxide monitor provides a full-colour display and can be used alongside a digital sensor like the 5S3 to maintain a comfortable and safe saturation diving chamber.
The SDA carbon dioxide (CO2) monitor provides a full-color display and can be used alongside a digital sensor like the 5S Mk3 to maintain a comfortable and safe saturation diving chamber.
The alarm set points and calibration can be achieved using the front panel user interface. The SDA carbon dioxide (CO2) provides audio/visual alarms, optional data-logging and 4-20mA/relay outputs. The SDA carbon dioxide (CO2) monitor interfaces with Analox's state-of-the-art digital 5S Mk3 sensor.
The SDA carbon dioxide (CO2) monitor replaces the now obsolete Analox 5001 and is fully retrofittable as a direct replacement.
Maintaining a comfortable and safe chamber environment is vital to achieving a successful diving operation. The accuracies supplied by the SDA carbon dioxide monitor are compliant with DNV, IMCA, Lloyds, ABS, and ADCi requirements/guidelines.
The SDA carbon dioxide (CO2) monitor is normally located in sat/dive control and can be supplied in rack or panel mount configurations.
Its flexibility is what makes it such a good product, as it can suit a wide range of requirements each customer may present. There are a multitude of sensors, alarms and strobes you can attach to one CDU (central display unit). Included in this expansive set up choices are optional add-ons, such as a beacon, a Kiosk set up and a DOM (Data output module).
