JWA Premier Open-Bottom Parachute Lift Bags PR-Series open bottom Parachute design with a single point attachment to the load-bearing strap arrangement for safe subsea lifting. Required Safety Inverter Line forces deflation in event of a dropped load. Fabricated from tough 3 ply PVC fabric with a load-bearing structural polyester scrim coated on both sides with PVC for durability & UV resistance. Radio Frequency welded seams for strength and integrity. Manufactured to IMCA D-016 Rev 4:2016. Independently tested to a safe working load ratio of 5:1. Supplied ready for use, complete with a user manual and service record book.
Restrictions / Notifications
Non-Returnable/Non-Cancelable This item cannot be canceled or returned once an order has been placed.
Open bottom parachute design with a single point attachment to the load bearing strap arrangement for safe subsea lifting.
Required safety inverter line forces deflation in event of a dropped load.
Fabricated from tough 3 ply PVC fabric with a load-bearing structural polyester scrim coated on both sides with PVC for durability & UV resistance.
Radio Frequency welded seams for strength and integrity.
Manufactured to IMCA D-016 Rev 4:2015
Independently tested to a safe working load ratio of 5:1
Supplied ready for use, complete with user manual and service record book.
Option to choose from 1 tonne/2,204 lbs. up to 50 tonne/110,200 lbs.*Lift Capacity
Specifications:
Model: PR (01-30)
Lift Capacity: 1 tonne/2,204 lbs. up to 50 tonne/110,200 lbs.
Material: 3x3 PVC
Material Coating: Structural polyester
Multiple Lift Bag Purchases:
For a multiple lift bag purchase within the same order, Amron will provide additional discounts and shipping options before order is fully processed. This can be accomplished by adding multiple lift bags to your cart or reaching out for a quote here:https://www.amronintl.com/request-for-quote.
JWA Premier Parachute Open Ended Lift Bag PR-Series is an open bottom parachute design with a single point attachment to the load-bearing strap arrangement for safe subsea lifting. It has a required safety inverter line that forces deflation in event of a dropped load. Fabricated from tough 3 ply PVC fabric with a load-bearing structural polyester scrim coated on both sides with PVC for durability & UV resistance. Radio Frequency welded seams for strength and integrity. Manufactured to IMCA D-016 Rev 4:2016. Independently tested to a safe working load ratio of 5:1. Supplied ready for use, complete with a user manual and service record book.
