Poseidon Atmosphere Full Face Mask w/ 2nd Stage Regulator & LP Hose

Meet Atmosphere—the full-face mask designed for comfort, communication, and a secure fit.  

• The face seal is "cushion type," with a convex reflective surface for excellent comfort and seal, a technology originally developed for RAF fighter pilots.
• Visor clamps are curved to give a sufficient squeeze over the entire visor, ensuring a leak-tight fit.
• Inhaled gas is directed to flush the visor for effective demisting.
• The mask has a large panoramic visor, giving an extremely wide field of view optically corrected for distortion-free vision. All curved surfaces and sides of the visor are frosted to avoid distortion and reflection.
• The visor is covered with a white protection film used to protect the optical surface when the mask is not in use.
• Head harness buckles are made of sturdy plastics and installed into the mask to withstand a pull load of >300 N.
• The inner part of the mask is equipped with a simple internal device to close the nasal passages for underwater equalization. 

• Approvals: EN 250:2014 cold water
• Minimum Water Temperature: Unlimited
• Gas: According to EN 12021 (air)
• Demist System: Flow-through, film
• Inhalation Resistance at 50 msw: (166 fsw, EN 250) 0,05 J/l
• Total Work of Breathing at 50 msw: (166 fsw, EN 250) 1,54 J/l
• Face Piece:
  • Mask Material: Black silicone
  • Visor Material: Polycarbonate
  • Neck Strap Material: Black silicone
• Second Stage Regulator: Poseidon Jetstream PP included (marked Atmosphere FFM)
  • Flow Rate: 1800 l/63 cu. ft. per minute
  • Safety Valve Opening Pressure: 261 +/- 14 psi (18 +/- 1 bar)
  • Technique: Upstream servo valve
• Hose: Xstream LP Hose (reinforced SBR/NR/CR) 
  • Material: Reinforced SBR/NR/CR
  • Burst pressure >1450 psi (100 bar)
  • Pull strength >225 lbs-ft. (1000 Newton)
  • Safety Inspection Holes: Both ends
  • Wear Protective Crimps: Both ends