Nuvair Multigas Color Alarm Analyzer CO, CO2, O2, Moisture/Dew Point, VOC Oil Vapor

• Digital analyzer with color display
• Audible and visual alarms for O2, CO2,CO, Moisture & VOC
• Controlled by a rotary/push knob
• User replaceable batteries and sensors
• Low battery warning indicator
• Sensor status indicators
• Micro SD storage ready
• Programmable visual and audible alarm thresholds
• Fast response: 10 ms (min) per channel sampling
• Compact water-resistant container (12 x 10.6 x 5.7 in)
• Easy to operate, reliable and accurate
• Optional relays for external alarm or compressor control

• O2 Sensor
  • 0–100% range
  • Resolution: 0.1%
• CO2 Sensor
  
  • 0–2000 ppm range
  • 0.0–0.5% or 0-100%
  • Resolution: 20 ppm
• CO Sensor
  
  • 0–50 ppm or 0–300 ppm range
  • Resolution: 1 ppm
  • Available dew point sensor up to -110°C
• Moisture Monitor
  
  • Moisture reading of relative humidity from 0.0 to 99.9%
  • Absolute humidity in mg/m3 or PPMv
• VOC Analyzer
  
  • VOC gas mix in the range of 0.01 to 20 ppm related to isobutylene
  • Resolution: 0.01 ppm

WARNING: Never expose gas sensors to pressure or you may cause damage and/or false readings. Damaged sensors will not provide accurate gas analysis. Most gas analyzers can be used to analyze a regulated gas sample flow, the contents of a gas cylinder, or the flow from a regulator. The flow rate of gas must equal 1-5 L/min. To produce this flow, a Flow Restrictor and Regulator may be required. A faulty Flow Restrictor can lead to a false analyzer reading. Flow Restrictors should be regularly tested with a Flow Meter. Inaccurate gas analysis can lead to serious personal injury or death.