Nuvair CO Sensor for Pro Alarm Analyzer 0-50 PPM / 220 FSC
Restrictions / Notifications
- Non-Returnable/Non-Cancelable
This item cannot be canceled or returned once an order has been placed. - CA PROP65
Warning: Cancer and Reproductive Harm www.p65warnings.ca.gov - MSDS
Safety Data Sheet available online or by request.
Features
Specifications
WARNING: Never expose gas sensors to pressure, or you may cause damage and/or false readings. Damaged sensors will not provide accurate gas analysis. Most gas analyzers can be used to analyze a regulated gas sample flow, the contents of a gas cylinder, or the flow from a regulator. The flow rate of gas must equal 1-5 L/min. To produce this flow, a Flow Restrictor and Regulator may be required. A faulty Flow Restrictor can lead to a false analyzer reading. Flow Restrictors should be regularly tested with a Flow Meter. Inaccurate gas analysis can lead to serious personal injury or death. |
Replacement sensors for the Nuvair Pro CO Alarm series of carbon monoxide analyzers and multi-gas analyzers equipped with CO sensors. Depending on the year of manufacture, your analyzer uses one of two different sensors. Because of analyzer firmware programming, only the correct replacement sensor will work.
There are two methods to determine which replacement sensor is needed for your analyzer
- Remove the four screws on the front face of the analyzer. Identify on the label of the sensor (FSc 220 or FSc 33).
- Turn the analyzer on and wait for the warm-up cycle to complete. The analyzer will read 000.
- Hold the [Prog] button for 2 seconds.
- Press the [On/Off] button to scroll through the settings until the display reads [Fct].
- The number shown by the display should match the FSc number labeled on the sensor.
ATTACHMENTS
Amron International Customer Service
We respond to most inquiries within 24 hours, Monday – Friday, excluding holidays.Phone
Toll-Free: (877) 462-6700Local & International: (760) 208-6500
Fax: (760) 599-3857
Hours of Operation
Customer ServiceMonday - Friday, 8am – 5pm Pacific Time Zone
Warehouse/Will Call Orders
Monday – Friday, 9am – 3:30pm Pacific Time Zone
-
Nuvair Replacement Sensor Model 33 fsc 200 ppm - for Pro Carbon Monoxide (CO) AnalyzersSKU: NUV-9501-300$269.10