Includes XS Scuba Din Valve Safety Handwheel - P/N: VX378-43A-VI
Made in the USA
Specifications
Inlet Threads: 7/8 in. -14 UNF threads (smaller hole)
Requires a dedicated 300 bar DIN valve
Attachment of DIN first stage only
Service Life:
Hydro retest every three years
Must retire after 15 years
4350 PSI Compatibility: Check with the manufacturer of your regulator & pressure gauge to ensure they are compatible with 4350 PSI
Transport Canada (TC): No permit for use in Canada
Air service only
Volume: 106 cu. ft.
Color: White
Valve Included: XS Scuba 7/8 in. DIN valve
Service Pressure: 4350 PSI / 300 bar
True Capacity: 105.2 cu. ft. / 11.1 liters
*Buoyancy Full: -4.8 lbs. / -2.18 kg
*Buoyancy @ 500 PSI: 2.1 lbs. / .95 kg
Empty Weight (No Valve): 33.8 lbs. / 15.3 kg
Outside Diameter: 7.39 in. / 188 mm
Cylinder Length (No Valve): 26.1 in. / 663 mm
*In seawater with valve
NOTES:
Luxfer scuba cylinders with service pressures up to 3000 PSI scuba cylinders are cleaned at the factory for use of oxygen up to 100% oxygen. If this cylinder is used with any gas exceeding 23.5% oxygen, it is the responsibility of the cylinder user to ensure that this cylinder and all components (valve, regulator, etc.) are maintained in a proper state of oxygen cleanliness. Luxfer scuba cylinders that exceed 300 PSI service pressure should not be used with any gas exceeding 23.5% oxygen.
This is currently a special-order item that requires a 30-piece minimum order.
