Kirby Morgan Diamond® Helmet with Male Waterproof Connector

SKU

500-711

The Kirby Morgan Diamond® Helmet with Male Waterproof Connector 500-711 is the next modular variation to the KMDSI stainless steel helmet. When the KM Diamond® is attached to our stainless steel helmet shell the diver can operate in either a surface exhaust or ambient water exhaust diving mode.

Before the diver enters the water, with a simple two-step process, they have the opportunity to switch the helmet into surface vent mode where their exhaled gas is sent to the surface and not into the surrounding water where they are working. On the surface, the exhaled gas can be sent to a reclaim system or simply secured on an open deck to vent into the atmosphere. The KM Diamond® can be also operated in the open circuit mode for the entire dive.

Restrictions / Notifications

Reseller Restriction
Due to vendor restrictions, this item cannot be sold to a reseller. If you are a reseller, please call us at 760-208-6500 or email sales@amronintl.com for more details.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Specs

More Information
	The Kirby Morgan Diamond® Is The Next Modular Variation To The KMDSI Stainless Steel Helmet. When The KM Diamond® Is Attached To Our Stainless Steel Helmet Shell The Diver Can Operate In Either A Surface Exhaust Or Ambient Water Exhaust Diving Mode. Before the diver enters the water, with a simple two-step process, they have the opportunity to switch the helmet into surface vent mode where their exhaled gas is sent to the surface and not into the surrounding water where they are working. On the surface, the exhaled gas can be sent to a reclaim system or simply secured on an open deck to vent into the atmosphere. The KM Diamond® can be also operated in the open circuit mode for the entire dive. Overview: Weight: KM Diamond® - 34.8 pounds Helmet Shell: Stainless Steel Control Knobs: Polyurethane Face Port/Lens: Scratch Resistant Polycarbonate Neck Dam: Neoprene. Optional latex neck dam available O-Rings: Buna-N Head Cushion: Nylon bag filled with #4 Polyester foam Recommended Lubricants: All helmets and masks are lubricated at the factory with Christo-Lube. Kirby Morgan recommends Christo-Lube or Tribolube for all gas train components. Dow Corning 111 Silicone or equivalent may be used for this helmet ONLY when noted. Inhalation Regulator: The Inhalation body and Pod is one complete unit with the regulator based on the Kirby Morgan 455 Balanced Regulator. CR Standards: This helmet meets or exceeds all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked. Manuals and BlowAparts for KM Diamond®: Manuals and BlowAparts Bulletins by product: Bulletins Note: The minimum operating temperature recommended for this helmet is 34 °F (1 °C), without the use of the water shrouds and hot water. Without hot water and the shroud system, the diver may be subject to hypothermia due to cold gas inspiration temperatures. CE Approved Kirby Morgan Diamond® Commercial Diving Helmet with Male Waterproof Posts - P/N: 500-711 Includes: (1) Kirby Morgan Diamond® Stainless Steel Diving Helmet P/N: 500-711 (1) Logbook with Pen - P/N: 125-001 (1) Helmet/Mask Bag - P/N: 500-901 (1) Tool Pouch, Small P/N: 25-628 (1) Backup Wrench, SS P/N: 40-552 (1) Anode Kit, All SS Helmets P/N: 525-375 (1) Neck Dam Assembly, size Medium P/N: 510-628 (1) Head Cushion Assembly(Snoopy) P/N: 510-754 Current Certification Test Specifications Warranty registration card Images of Kirby Morgan Helmets, Masks, or logos are registered trademarks of Kirby Morgan Dive Systems, Inc. Used with permission.