Kirby Morgan 500-011 SuperLite® 17B Commercial Diving Helmet with Male Waterproof Connectors

Features:

• SuperFlow® Regulator - The 505-027 SuperFlow® "B" Regulator on the SuperLite® 17B offers high performance. The regulator has been tested at Dive Lab at Panama City, Florida. It meets all current U.S. Navy and European diving standards.
• Air Train - The air train diffuses incoming breathing air/gas onto the face port/lens to defog and ventilate.
• Brass Handle - Handle can be removed without breaking seals, making it quick and easy to attach accessories.
• Defogging Steady Flow Valve - Provides an additional flow of gas into the helmet for ventilation and defogging.
• Emergency (EGS) Valve - Supplies backup breathing gas to the diver.
• Fiberglass and Carbon Fiber Reinforced Shell - Kirby Morgan® has over 50 years experience in composite laminations. The helmet shell is hand laid up glass fiber reinforced thermal setting polyester (fiberglass) with carbon fiber reinforcement at key points for added durability. It is light and highly impact resistant, and provides a heat/cold barrier as well as being an excellent electrical nonconductor.
• Gas Supply Non-Return Valve - Commercially Rated™ It prevents loss of gas pressure in the event of umbilical damage.
• Nose Block Device - Allows the diver to block the nose to equalize ears.
• Side Block - Multi-use side block has additional ports built in to provide controlled air flow, if needed.
• Silicone Oral Nasal Mask - Made of a superior silicone material which is hypo-allergenic and has a longer work life than latex.
• Whisker Wings - Bubble deflecting Whisker wings keep bubbles further from face port and ears, improving visibility and decreasing internal noise.
• Neck Dam/Yoke Assembly secures the commercial diving helmet to the commercial diver’s head and positively prevents accidental removal. The angled neck dam helps the helmet ride comfortably while working face down.
• Low Pressure Plug is removed and replaced by a suit inflation hose when the commercial diver is wearing a dry suit.
• Communications are either bare wire posts or a male Marsh Marine style waterproof connector.
• Latch Catch Mechanism locks the neck clamp and yoke in place.
• Water Exhaust automatically keeps water drained from the commercial diving helmet.
• Kirby Morgan Quad-Valve™ Exhaust System (Patents Pending), The Kirby Morgan Quad Valve Exhaust System is a superior exhaust system with exceptionally low exhalation resistance that helps to keep the commercial diving helmet free of contaminants in polluted water. The Kirby Morgan Quad-Valve™ Exhaust System is the first exhaust that isolates the breathing system from the surrounding water with a four valve, low breathing resistance design.

Specifications:

The SuperLite® 17B helmet has been tested and conforms to the performance requirements as set forth in Annex II of Directive 89/686/EEC and, as far as applicable, the EN 250:2000, EN 250/A1:2006 and EN 15333-1:2008 (class B).

• CE certified
• Weight: 29.03 lbs.
• Helmet Shell: Fiberglass, polyester resin, polyester gel coat, and carbon fibers
• Control Knobs: Polyurethane
• Lens: Scratch Resistant Polycarbonate
• Neck Dam: Neoprene. Optional latex neck dam available.
• O-Rings: Buna-N
• Head Cushion: Nylon bag filled with #4 Polyester foam
• Recommended Lubricants: All commercial diving helmets and band masks are lubricated at the factory with Christo-Lube. Kirby Morgan recommends Christo-Lube for all gas train components. Dow Corning 111 Silicone lubricant may also be used with gas mixtures less than 50 % oxygen.
• Regulator: The 505-027 SuperFlow Regulator on the Kirby Morgan SuperLite® 17B Commercial Diver's Helmet offers high performance. The commercial diving regulator has been tested at Dive Lab at Panama City, Florida. The Kirby Morgan SuperLite® 17B Commercial Diver's Helmet meets all current U.S. Navy and European commercial diving standards.
• Cage Code: The cage code for identifying KMDSI products for U.S. government purposes is 58366.
• CR Standards: These helmets meet or exceeds all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.
• Operational Specifications:
  • Maximum depth on air 220 FSW (67 MSW) with the old style single exhaust or new Tri-Valve® Exhaust Assembly
  • Maximum depth on air - 150 FSW (45.73 MSW) when equipped with the old style double exhaust whisker assembly.
  • Maximum depth on HEO2 Surface Supplied, 330 FSW (100 MSW) Work rate - Heavy - 62.5 - 75 l.p.m. RMV. Maximum current - 3 knots with standard exhaust, 5 knots with Tri Exhaust Umbilical, 3/8 inch Maximum length 600’ (183 MSW)
  • Breathing Gas Requirements, 4.5 a.c.f.m. at the side block at depth.
• Temperature Limitations:Use at water temperatures below 33° F (1°C) requires use of Hot Water Shroud (Part # 525-100) and hot water.

SuperLite® 17B Commercial Diving Helmet with Male Waterproof Connectors - P/N: 500-011 Includes:

• (1) Manual SL® 17B - P/N: 100-001
• (1) Logbook with Pen - P/N: 125-001
• (1) Tool Kit with Pouch - P/N: 525-620
• (1) Helmet/Mask Bag - P/N: 500-901
• (1) Head Cushion Foam Spacer Kit - P/N: 525-745

Manuals and BlowAparts for SuperLite® 17B: Manuals and BlowAparts

Bulletins by product: Bulletins

Note:

The Kirby Morgan Hot Water Shroud (Part # 525-100) in conjunction with hot water to the commercial diver should be used whenever commercial diving operations are conducted using HEO2 at water temperatures less than 60°F (15.56°C) for the comfort of the commercial diver. Kirby Morgan DSI further recommends that the shroud be used in conjunction with hot water to the commercial diver whenever commercial diving operations are conducted using air or mixed gas, in waters colder than 36°F (2.22°C) to reduce the possibility of demand regulator icing.

Usually the greatest danger of demand regulator icing will be encountered on deck when the surrounding air temperature is less than 32°F (0°C). This effect is primarily due to the refrigeration effect of breathing air pressure reduction, and the addition of moisture from the commercial divers exhalation coming in contact with the topside air temperature.

If diving where the water temperature is 36°F (2.22°C) or warmer but the topside air temperature is below freezing, (32°F (0°C) icing of the demand regulator is possible. To help eliminate the possibility of freezing on the surface, warm water should be run over the exterior of the demand regulator prior to water entry, if the hot water system is not used.

Only commercial diving equipment certified and tested according to EN 250/E DIN 58 642 may be used with the Kirby Morgan SuperLite® 17B Commercial Diver's Helmet when conducting commercial diving operations in European EC compliant countries.

The umbilical assembly should be composed of good quality diving hose that meets commercial diving industry standards. Generally, gas hose will be married to the communications wire, pneumofathometer hose, and strength member in a manner that will allow the strength member to receive all the strain. There are also good quality umbilicals available that are assembled at the factory using a twisted method which does not require marrying. Regardless of the system used, the umbilical is the commercial diver’s life line and should always be of excellent quality and maintained carefully.

Images of Kirby Morgan Helmets, Masks, or logos are registered trademarks of Kirby Morgan Dive Systems, Inc. Used with permission.