Kirby Morgan Mask Spares Kit for KMB 18 & 28 BandMasks®

SKU

525-319

Restrictions / Notifications

Reseller Restriction
Due to vendor restrictions, this item cannot be sold to a reseller. If you are a reseller, please call us at 760-208-6500 or email sales@amronintl.com for more details.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Specs

More Information
	Kirby Morgan Mask Spares Kit for KMB 18 and 28 BandMasks - P/N: 525-319 Includes 510-008: O-ring (2) 510-010: O-ring (1) 510-211: O-ring (1) 510-260: O-ring, Face Port (1) 510-481: O-ring (1) 510-490: O-ring (1) 510-509: Head Harness (1) 510-550: Oral Nasal Valve (1) 510-561: Valve, Water Dump, Black (1) 510-575: Nose Block Pad (1) 510-712: KMB Hood Assembly (1) 510-724: Low Volume Oral Nasal Mask (1) 510-747: Oral Nasal Mask (1) 515-033: Communications Set (1) 525-309: Regulator Rebuild Kit (1) 525-311: Side Block Rebuild Kit (1) 525-752: Tri-Valve Exhaust Kit (1) 530-035: Screw (2) 530-045: Screw (1) 550-061: Spacer (1) Kirby Morgan Mask Spares Kit for KMB 18/28 Band Masks - P/N: 525–319 Parts List Bulletin #4 of 2016. April 21, 2016, Change to Product Standardization of Microphones & Earphones Bulletin #9 of 2009. December 7, 2009, New Product Bulletin New Oral Nasal Mask, P/N: 510-747 (Replaces P/N: 510-690) Images of Kirby Morgan Helmets, Masks, or logos are registered trademarks of Kirby Morgan Dive Systems, Inc. Used with permission.

Information

The Kirby Morgan 525-319 Mask Spares Kit for KMB 18 and 28 BandMasks® contains commonly replaced parts on the 18B and 28B BandMasks®.

O-rings should be lightly lubricated with food grade silicone Dow Corning 111 or equivalent in accordance with the operations and maintenance manual. Christo-Lube may also be used. At a minimum, all helmet or BandMask o-rings should be replaced at least once a year in accordance with the A2.1 for the helmet or mask being inspected.

During daily and monthly maintenance, disturbed o-rings and valves may be reused, providing no damage or deformation is found. O-rings and valves may require replacement more often than yearly if the helmet or mask use is extreme, or if the helmet or mask is used in waters containing oil or chemical contamination. Daily cleaning and inspections as well as performing the monthly inspection A2.2 will identify the need more accurately than simply placing a number of hours between overhaul.

Store spare o-rings, valves and soft goods in a cool, dark, dry place. Avoid prolonged exposure to temperatures above 90°F and/or exposure to ultraviolet rays. Do not lubricate exhaust valves. Lubricating valves can cause dirt to stick, allowing leakage.

Please see the Specs tab to see the components of the kit.

Resources