Hydraulics International Oxygen O2 Gas Booster AMU 3,000 psi Max Outlet Pressure - 250 psi Min Inlet Pressure

Features:

• Automatic stop & restart high pressure limit control FACTORY pre-set to 3000-psig (adjustable)
• Automatic stop & restart low pressure limit control FACTORY pre-set to 300-psig (adjustable)
• Manual start & stop switch
• Safety relief valve set at 3,200 psi
• Gas inlet pressure reducing regulator to control safe fill rates
• Bypass line with on/off valve (needle type)
• O2 cleaned to MIL-STD 1330D with certification
• Double acting configuration
• Inlet & outlet pressure gauges (calibrated with certs)
• Hour meter with 6-digits
• Sealed ball bearings
• Inlet & outlet 5-micron filters
• Outlet and bleed valves (needle type)
• Air cooled
• Approved for Military Use

Specifications:

• Motor Rating: 2 HP
• Booster Part Number: 2G-A30302-A1-A2-PR-1330D
• Current at 115 Volts, 1-Phase, 60-Hz: 24 Amps
• Weight: 145 lbs.
• Noise Level at 3 ft: 60 dB(A)
• Cooling Air Needed: 176 CFM
• Delta Temperature (Gas Outlet vs. Ambient): 15-25 °F
• Operational Ambient Temperature Range: -40 to +200 °F
• Inlet Pressure Range: 300-3,000 psi
• Operating Pressure Range: 300-3,000 psi
• Gas Inlet, Outlet and Vent Ports: 1/4 in. FNPT
• Overall Dimensions (L x W x H): 32 in. x 20 in. x 11 in.
• Cooling Method: Air-Cooled
• Drive Type: Direct Drive
• Stages: Single Stage, Double Acting

Optional Controls:

• Dual outlet pressure control
• Inlet & outlet hose kits
• Remote start/stop switch with 6-foot cord
• Four (4) port outlet manifold
• 2-stage configurations
• Gas inlet & outlet Quick Couplings (QD)