Nuvair Carbon Dioxide (CO2) Sensor Replacement for Pro Carbon Dioxide (CO2) Analyzers

Features:

• Replacement carbon dioxide (CO2) sensor for the following Nuvair Pro CO2 analyzers:
  • 9616
  • 9617

  Specifications:

  • Flow Rate: 0.6-1 L/min
  • Resolution: 50 ppm resolution from 0 to 1000 ppm, then 100 ppm up to full scale.
  • Repeatability: ± 2% of full scale @ 68°F (20°C) ambient.
  • Linearity: At ambient temperature and pressure: ± 2% FSD or ± 10% of the reading, whichever is greater.
  • Sensor Type: NDIR (Non-dispersive infrared)
  • Expected Sensor Life: 5-10 years based on analyzer handling and use.
  • Replacement Procedure: Sensor can be replaced by the user.
  • Range: 0-2,000 ppm
  • Operating & Storage Temperature: -4° to +122°F (-20° to +50°C)
  • Operating Humidity: 0 to 95% rh, non-condensing
  • Weight: 0.2 oz. (6 g)

  * All specifications are at ambient/sea level, 77°F (25°C) and are subject to change without notice. Calibration must be confirmed with a calibration CO2 test gas.

  *WARNING: Never expose gas sensors to pressure or you may cause damage and/or false readings. Damaged sensors will not provide accurate gas analysis. Most gas analyzers can be used to analyze a regulated gas sample flow, the contents of a gas cylinder, or the flow from a regulator. The flow rate of gas must equal 1-5 L/min. To produce this flow, a Flow Restrictor and Regulator may be required. A faulty Flow Restrictor can lead to a false analyzer reading. Flow Restrictors should be regularly tested with a Flow Meter. Inaccurate gas analysis can lead to serious personal injury or death..