×

:

Not a valid Time
This is a required field.

AVOX Pressur Vak II - Medium Face Seal without 1st Stage Regulator and Microphone

SHIP NOW
SKU
803139-01-02
$4,514.77
Eligible for Free Shipping Over $125
PRESSUR VAK II BIBS MASK WITH MEDIUM FACE SEAL;
More Information

Features:

  • Quick disconnect face seal allows easy cleaning
  • Full head harness for added comfort during long administration
  • Exhausts exhaled gases over board, permitting minimum ventilation of the chamber
  • Demand Regulator permits constant flow operation
  • Demand Regulator designed to operate with constant inlet pressure of 65 to 125 PSI over chamber pressure

Specifications:

  • Weight: 4.4 lbs.

Pressur Vak II™ - Medium Face Seal without 1st Stage Regulator Assembly without Microphone - P/N: 803139-01-02 Includes:

  • (1) Oxygen Cleaned Quick Disconnect Socket - P/N: 18969-00
  • (1) Exhaust Quick Disconnect Socket - P/N: 59853-00

PRESSUR VAK II BIBS MASK WITH MEDIUM FACE SEAL;
FAQ's
Does the 803139-01-02 Pressur-Vak II BIBS Mask have any test certs confirming it is suitable for use in a saturation chamber rated to 300 MSW
No. The Avox Pressur-Vak II BIBS Mask is not intended for use in a saturation diving system. Amron's 350M and 450M BIBS Masks are designed for use inside a saturation diving system and have been tested to Norsok U-101 breathing standard and performance tested by Nui and validated by DNV.
Is the Pressur-Vak II BIBS mask DNV approved?

No.

Can the AVOX Oxygen Mask hoses and diaphragms be cleaned using a sterilizing machine? The sterilizing machine operates at 212°F (100°C).

The AVOX Oxygen Mask was not designed to be cleaned by a sterilizing machine. We recommend using SaniZide-Plus to disinfect your AVOX Inhalator. You can also clean all metal and non-metal parts with nonionic detergent such as “Ivory Liquid” and warm water (110 °F maximum). Rinse with clear water and dry completely before storing or using. 

The information provided should be used as a guideline only. Every company should have their own procedures in place for cleaning and/or disinfecting safety equipment used in oxygen and breathing environments.

Are the hose connections on the Amron BIBS mask the same as the Avox hose connections?

Yes, both the Amron and Avox BIBS Mask connect to same Hansen quick disconnects.  Amron part number 59853-00 for the exhaust quick disconnect and 18969-00 for the oxygen inlet. 

What does BIBS stand for?

Built-in Breathing System 

How often should I clean my BIBS Mask Hose Assembly?
The frequency of cleaning will vary based on the hours of use. Typically the hoses should be internally cleaned at least every 6 months. They can be cleaned with SaniZide or soap & warm water, rinsed with water, and dried. Some facilities require them to be cleaned to a specific O2 cleaning standard.
What is the temperature rating for the plastic used to make the 803100-01 Manifold Assembly?
The polycarbonate which this manifold assembly is manufactured from can withstand temperatures down to -22ºF (-30ºC).
Amron International Customer Service
We respond to most inquiries within 24 hours, Monday – Friday, excluding holidays.
Phone
Toll-Free: (877) 462-6700
Local & International: (760) 208-6500
Fax: (760) 599-3857
Email
sales@amronintl.com
Hours of Operation
Customer Service
Monday - Friday, 8am – 5pm Pacific Time Zone

Warehouse/Will Call Orders
Monday – Friday, 9am – 3:30pm Pacific Time Zone
We found other products you might like!