AVOX Exhaust Regulator Assembly

WARNING: Please follow instructions provided in the user manual accompanying this product before replacing any of the components. General inspection of this equipment should be performed before and after each extended dive program, especially the diaphragm, for wear, rips, tears or punctures. Replace the Diaphragm and Stem Guide Assembly annually or more often as required.

• Case Assembly; D-2 - P/N: 801275-00
• Diaphragm and Stem Guide Assembly, D-3 - P/N: 801272-00 
• Cover, D-4 - P/N: 10003027 
• Clamp, D-5 - P/N: 26010-01 
• Exhalation Valve, D-6 - P/N: 800963-00
• Exhalation Valve Spring, D-7 - P/N: 13796-00

• Case Assembly, Cover and Clamp: 316 stainless steel
• Diaphragm and Stem Guide Assembly: Stainless steel and buna n
• Valve & Spring: 316 stainless steel 

CAUTION: Any service or overhaul performed on this equipment shall be done only by those facilitates experienced in, or by personnel knowledgeable in oxygen equipment. All procedures shall be performed in an area free of oil, grease, flammable solvents or other combustible materials. Such materials, as well as dust, lint and fine metal filings are all potential combustibles, which might, when exposed to oxygen under pressure, ignite and result explosion and/or fire. Specifications of materials for oxygen service is the user’s responsibility. Please consult an expert.