Apeks XTX200 1st Stage (Yoke) and 2nd Stage Regulator Set

SKU

AP0334F

The Apeks XTX200 1st Stage (Yoke) and 2nd Stage Regulator Set is the flagship of the Apeks regulator range and the definitive blend of style and high performance. Every detail has been carefully designed to offer a regulator of the highest quality. This regulator is suitable for coldwater use and is compatible with EAN40 out of the box.

Restrictions / Notifications

Military Sales Only
This item is restricted to Military and Law Enforcement Agencies only. You must be logged in and approved to purchase this item.
Reseller Restriction
Due to vendor restrictions, this item cannot be sold to a reseller. If you are a reseller, please call us at 760-208-6500 or email sales@amronintl.com for more details.
Vendor Export Restriction
Due to vendor restriction this item is restricted to sales within the United States and cannot be exported.
Contact us for a quote: Call (877) 462-6700 or email sales@amronintl.com.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Specs

More Information
	First Stage Features: Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth. 2 HP ports and 4 LP ports are angled for optimum hose routing An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out Second Stage Features: Pneumatically-balanced second stage results in smooth, easy breathing The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used. Press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the center for the full effect of the purge, i.e. when regulator clearing etc. The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation. Easy-to-grip opening effort control knob keeps the diver in control The 2nd stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mold, yeast and algae. A silicone exhaust valve improves the breathing performance of the regulator The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water Specifications: Connection: Yoke Type of First Stage: Over-Balanced Diaphragm Design, Environmentally Sealed Body Type: One Piece Forged Body Number of HP Ports: 2 (7/16 in. UNF) Number of LP Ports: 4 with 5th Port Option (3/8 in. UNF) Environmental Dry Kit: Standard First Stage Exterior: Chrome Over Marine Brass Orientation: Convertible LH or RH Coldwater Use: Yes Type of Second Stage: Pneumatically Balanced Opening Effort Control Knob: Yes Integrated Venturi Lever: Yes Mouthpiece: Comfo-bite™ Exhaust Tee: Diver Changeable - Comes with 2 Sets Heat Exchanger for Freezing Resistance: Yes Hose Type: Braided Flexi-Hose Overall Work of Breathing (WOB) Scores: Average 0.70 joules/liter Nitrox Compatible: Yes to 40% O2 when new, out of the box / Can be cleaned to 100% Weight: 2.8 lbs. (1272g)

Information

The XTX200 regulator set features an innovative Diver Changeable Exhaust system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. The regulator will be supplied with both sets of exhaust tees.

This regulator can be converted from a right-handed hose configuration to a left-handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However this procedure MUST only be performed by an APEKS Authorized Service Technician

Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable. An optional 5th port is available with the additional bonus of an integrated heat exchanger on the Tungsten, XTX200 and XTX100 first stages. Please contact your Amron sales representative for more information.

Resources