Anderol Synthetic Diester Compressor Oil - 30 WT - 5 Gallon

Features

• Significant Reduction of Valve Carboning: Whether your compressor is new or old, you can expect a better performance standard using Anderol® Synthetic Diester Compressor Oil. The cleanliness of operation combined with the good lubricating properties of Anderol® compressor oil offers significant savings on replacement parts and valve maintenance.
• Greater Safety: Greater Safety is offered by the approximately 100° F higher flash, fire, and auto ignition temperatures of Anderol® as compared to the petroleum compressor lubricants. The significant reduction of valve carboning and inter cooler and after cooler fouling combined with a higher auto ignition temperature, dramatically reduces the most common causes of compressor explosions and fires. This unique lubricant also features high film strength, a low order of toxicity, and biodegradability. Auto ignition Temperature is 770° F. Do not use above 450° F (232° C). Pour Point is -30° F.
• Compatibility: The following seals, paints and plastics are recommended for use in contact with Anderol® lubricants: Viton, High Nitrile Buna-N, Teflon, Epoxy Paint, Nylon, Delrin, Celcon, Oil-Resistant Alkyd.

Anderol® is NOT recommended for use with Neoprene, SBR Rubber, Low Nitrile Buna-N, Acrylic Paint, Lacquer, Polystyrene, PVC, and ABS.

Specifications

• 5 gallon size
• Auto ignition Temperature is 770°
  
• Do not use above 450° F (232° C)
• Pour Point is -30° F.