Analox ACG+ Multi Gas Analyzer

Only %1 left

SKU

ACG+

Please contact Amron directly for GSA pricing at 1-877-462-6700.

As low as $11,232.28

PSI Range

Ethernet Option

Qty

Eligible for Free Shipping Over $125

Restrictions / Notifications

Non-Returnable/Non-Cancelable
This item cannot be canceled or returned once an order has been placed.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Specs

More Information

Features

Provides continuous monitoring 24/7.
Low maintenance and is easy to install and maintain.
Provides 90 days of data logging, which you can easily retrieve via a USB connection.
Cost effective alternative to colorimetric tube testing.
Supplied as either a fixed or portable version, depending upon your needs.
Can be used on any breathing air compressor.
Digital display.

Gas	Range	Accuracy	Technology
O2	0 to 50%	±(0.035% O2 + 1% of reading + 0.15% of reading/°C)	Analox MEC intelligent electrochemical oxygen sensor
CO2	0 to 1000 ppm	±(25 ppm CO2 + 1% of reading + 1 ppm CO2/°C)	Analox 5S3 intelligent NDIR sensor
CO	0 to 20 ppm	±(1 ppm CO + 5% of reading + 0.1 ppm CO/°C)	Analox MEC intelligent electrochemical sensor
VOC	0 to 100 ppm	±(1 ppm VOC + 5% of reading + 0.25% of reading/°C)	Analox MEC intelligent PID sensor
Water Vapor	0 to 100 mg/m3	±(0.15 mg/m3 H2O + 20% of reading)	Water vapor sensor using capacitive technology

Specifications

Gas Ranges:
- Oxygen (O2): 0-50%
- Carbon Dioxide (CO2): 0-1000 ppm
- Carbon Monoxide (CO): 0-20 ppm
- Volatile Organic Compound (VOC): 0-20 ppm
- Water Vapor: 0 to 100 mg/m3
Power: 24V DC
Optional Battery Power: NiMH or Li-ION
Optional Mains Adaptor: Universal input 95 to 250 V AC, 50/60 Hz
IP Rating: IP45
Response Time: T90 <120 seconds T90 <15 minutes H2O sensor
Temperature:Operating: 23°F to 122°F / −5 °C to 50 °C
Storage: 14°F to 140°F / −10 °C to 60°C
Flow Rate: 0.5L per minute (max)
Inlet Pressure: 5-10 bar gauge (optional regulator can be purchased)
Humidity: 0-99% RH (non-condensing)
Outputs:1 x normally open relay contacts
1 x normally closed relay contacts
3 x 24 V DC switched output
NOTE: Ethernet option is included for ACGPAAAAAYX only

Information

The ACG+ offers continuous monitoring of up to five different gas variables (oxygen, carbon monoxide, carbon dioxide, volatile organic compounds and water vapor) and simultaneously displays results for testing and calibration purposes. This eliminates potential delays and downtimes while test results are sent out for analysis. The automatic data log provides additional peace of mind for decision makers.

The ACG+ has also made cumbersome colorimetric tubes obsolete by drastically reducing the potential for human error in gas analysis. The continuous monitoring also has virtually eliminated the need for time-consuming spot checks.

The ACG+ is available in either a fixed location model or convenient portable units. This adaptability provides designers, procurement officers and equipment specialists some options in closed quarter situations.

While each ACG+ unit can monitor up to five gasses simultaneously, each analytical system operating in the ACG+ is independent of the others. This means sensors can be replaced individually without needlessly causing downtime.

Resources