Request a Quote

Please fill out the following form below.

Amcommand ™ I Communicator with Rechargeable Battery 2810-01

SKU: 2810-01 Rate this product

$938.00

Availability: 21 available on Jan 26, 2018. Usually ships in 8 weeks if not in stock.

Click to Enlarge Image

Overview

Features:

  • Built-in internal charger with medical grade power supply
  • Integrated intelligent battery charging circuitry allowing unit to be left on charge indefinitely without damage to the batteries or communicator
  • Communicator can be charged while in operation
  • Supplied standard with internal 12V rechargeable battery
  • Improved battery life - 85 hours
  • Can operate with either AC Power Operating Range: 90-264 VAC, 47-440 Hz or 12 VDC
  • Abundant audio power to support two divers
  • All controls and connections located on front panel
  • Independent diver and tender controls
  • Operates in 2 or 4-wire modes
  • MP3 Player Input allows for an external audio signal for diver entertainment
  • Record Jack for recording dive operation audio
  • External 12 VDC power connection

Specifications:

  • AC Power Operating Range: 90-264 VAC, 47-440 Hz
  • Power Supply Voltage: 12 VDC Nominal (9 Volts Minimum - 16 Volts Maximum)
  • Power Supply: Medical Grade
  • Frequency Response: 300 to 4000 Hz
  • Audio Power Output: 20 Watts per channel
  • Rechargeable Battery: 1 each 12-Volt DC slide terminal gel-cell. (Expected life  85 hours)
  • Height: 6.87 in. (17.45 cm)
  • Width: 10.62 in. (26.98 cm)
  • Depth: 9.68 in. (24.59 cm)
  • Weight: 11.45 lbs. (5.20 kg)

Amcommand ™ I Communicator with Rechargeable Battery - P/N: 2810-01 Includes:

  • (1) 12 VDC Sealed Lead Acid Gel-Cell Rechargeable Battery with Slide terminals - P/N: 2890-05
  • (1) User Manual – P/N 2810-01-UM

Tech Note:

All communicators will transfer topside noise to the diver when using the radio speaker only. To eliminate background noise and achieve clear concise communications, use a Push-to-Talk microphone, headset, or a Remote Walk-and-Talk with a headset.

Note: Amron reserves the right to change the battery brand at any time without notice.

Description

The Amron International Amcommand ™ I Communicator with Rechargeable Battery boasts 20 watts of audio power with state-of-the-art electronics to make the Amcom ™ I Series the best portable one-diver communicator for hard-wire underwater radio communication on the market.  It now features a built-in internal charger with integrated intelligent battery charging circuitry and 12V rechargeable battery.  The unit can be operated in either 2-wire or 4-wire mode and comes standard with a MP3 connection allowing you to listen to your favorite music while you work. The electronics are housed in a high impact resistant case for maximum protection.

Note: Amron reserves the right to change the battery brand at any time without notice.

Videos

Additional Information

Search Weight No
Brand Amcommand
Managed FEATURED PRODUCT
GSA No
DOD No
Clearance Item No
Video No
FAQ
 

Product FAQ's

Ask a Question

  • What type of cable do I need to connect my Amron communicator to my Outland video system?
    Amron communicators and Outland Technology’s video systems have a RCA Phono Jack. To connect the two systems together, you will need an audio cable with RCA Plugs on each end.
    How helpful was this information?

  • Should I use a GFI when operating my radio off AC power?

    When operating your Amron Diver Communicator on AC, it is critical to use a Ground Fault Circuit Interrupter (GFCI) or isolation transformer for tender and diver safety. Surges and spikes are common on AC lines found on ships, generated locally, or at the end of long extension cable runs and can exceed 1kVolt. Such surges and spikes can cause the fuses, F1 and F2, to blow on the battery charger board and in extreme cases damage the charger circuitry. The battery charger is designed so that such a failure will be isolated and will not cause a safety issue to the tender or divers. It is strongly advised that your Amron Diver Communicator be operated on an AC circuit with a high quality surge arrester or an AC isolation transformer.

    How helpful was this information?

  • Will the 2810A-FS Field Service kit work on my 2810-01, 2810E and/or 2810A Communicator?

    Yes, the 2810A-FS Field Service kit will work on the 2810-01, 2810A and 2810E communicators. 

    How helpful was this information?

  • Can you stack the banana plugs from the diver's communications cable so you can have two or three divers on the one diver communicator?

    You can stack up to two divers on the one diver communicator. Stacking three divers is not recommended.

    How helpful was this information?

  • Can the diver listen to music if his umbilical is configured for 2-Wire communications?

    No. The MP3 Player feature can only operate in 4-Wire mode.

    How helpful was this information?

  • How do I control the music volume I’m sending the diver?

    There is no separate volume control provided for the MP3 player input so you will have to use the MP3 player to control the music volume.

    How helpful was this information?

  • Will the tender hear the music the diver is listening to?

    No, the signal can not be heard by the tender.

    How helpful was this information?

  • Will my recording device record the music the diver is listening to? 

    No, the music signal is not sent to the tape recorder output.

    How helpful was this information?

  • If I were to connect my smartphone to the MP3 player input, would the diver be able to speak to someone over the phone?

    Yes, however the tender is required to turn on the communicator speaker and set the phone’s microphone next to it so the caller can hear the diver. We also found that the diver’s voice can be difficult to understand for the caller, so we recommend that the diver speak very slowly and clearly. 

    How helpful was this information?

  • Why does the speaker on my communicator sound muffled?
    The simplest way to fix this issue is to unplug the red banana plug from the red microphone 5-way binding post on the communicator and rotate it 180 degrees then reinstall it. This should fix your problem. For a more detailed explanation of what happened, please read below. The issue is not with the communicator, it is with the wiring of the umbilical. There is always the potential for wiring the speakers and microphone out of phase, similar to wiring the speakers on a car stereo system. There is an orientation to the banana jacks and they should be wired for proper phasing with the communicator. A banana plug does have an identified ground side marked on the plug. Amron always sets up their umbilicals so that the ground side is located on the left side so the user can consistently plug in their umbilical and avoid phasing issues. If a banana plug is plugged upside down or is wired out of phase, the sound quality will be significantly reduced. If the phasing is out and the orientation of both plugs are the same, then the banana plug wiring should be reversed on “only one plug” to avoid this issue again. It does not matter which plug you choose to reverse the wiring on.
    How helpful was this information?

  • Can I operate my communicator while I’m charging the internal battery?
    Yes, however, the charger will charge the battery at a slower rate as some of the charger power is being used to operate the communicator. For the communicator only, units without options, about 20% of the charger’s power is being used by the communicator but units with HSU (Helium Speech Unscrambler) most of the battery charger energy is going to the communicator and HSU.
    How helpful was this information?

  • Can my Amcom communicator work on 240V / 60Hz?
    Yes, the unit will operate on 240V 50/60Hz.
    How helpful was this information?

ATTACHMENTS

Customers Who Bought This Item Also Bought