Alphatec FLASH Type NFPA Level A VP1 with Socks and Visor

FEATURES: 

• Excellent permeation times in combonation with a high degree of flame resistance. 
• Provides an outstanding barrier against a wide range of chemicals.
• Reusable, repairable.
• Single skin, no cover required.
• Highly abrasion resistant material.
• AlphaTec® Bayonet ring system for fast, easy glove change.
• Meets NFPA 1990 (NFPA 1991) including the optional chemical flash fire and liquefied gas protection requirements.
• Patented fabric system with chloroprene rubber on an aramid base fabric, providing excellent flame and abrasion resistance.
• Well-proven encapsulating design that fits on top of all major SCBA brands and bottle sizes.
• PyroMan™ tested.

SPECIFICATIONS:

• Available Sizes: 2XS, XS, S, M, L, XL, 2XL, 3XL
• Color: Orange
• Material:

• Outer: Aramid fabric coated with chloroprene rubber.
• Inner: Chloroprene rubber and a multilayer barrier laminate.

• Seam Type: Stitched and Taped
• Shelf Life: 7 years
• Visor and Face Seal:

• Visor Material: Rigid 2 mm impact and chemical resistant PVC
• Comes in the larger VP1
• Covered by a replaceable, antistatic Tear-off/ATEX lens.
• Measurements:

• Top edge to bottom edge VP1: 503 mm 
• Widest place at the top: 580 mm
• Curvature: approx. 180 degrees

• Ventilation:

• For the safety of the wearer, it provides a constant level of overpressure inside the suit.
• The AlphaTec® Regulating valve has 3 ventilation rates plus zero/off position:

• 2 l/min
• 30 l/min
• 100 l/min

• CEJN 221 male coupling for connection to the SCBA (requires separate connection hose).
• Two overpressure valves in the back of the hood.

• Zipper:

• AlphaTec® HCR zipper, which includes a barrier film for increased chemical resistance.
• The zipper is closing downwards, for added safety, and is protected by a flap/splash guard.

• Gloves and Attachments:

• 2-part system with AlphaTec® 02-100 barrier inner glove and AlphaTec® 38-628 Viton®/Butyl rubber glove.
• The gloves are attached with a Bayonet glove ring system, which offers quick and simple glove exchange.
• NFPA 1990 (NFPA 1991) certified suits have a 3-part glove system with the above plus the AlphaTec® 58-800 Overglove for additional cut protection.

• Socks:

• Sewn-in socks/booties made of the suit material.
• NFPA 1990 (NFPA 1991) certified suits have sewn-in socks.

• Included:

• 1 pce inside hump protective foam
• 1 pair of cotton comfort inner gloves •
• 2 pcs extra locking pins for the Bayonet glove ring system
• 1 pce Molycote lubrication for the O-rings in the Bayonet glove ring system
• 1 pce grease stick for lubrication of the zipper •
• 1 pair of comfort silicone oversocks (only for suits with sewn-in socks)
• 1 pce coat hanger
• 1 pce AlphaTec® storage bag

• Optional Features and Accessories:

• Anti-fog lens
• Hands-free visor light system
• Ventilation System

• Weight: Approx. 6.0 kg/13 lbs for a suit size L with sewn-in socks.

STANDARDS & CERTIFICATIONS:

• NFPA 1990 (NFPA 1991), incl. the optional Flash Fire & Liquefied Gas protection requirements*
• EN 943-1:2015 + A1:2019 / EN 943-2:2019
• EN 1073-2:2002 (radioactive particle protection)
• EN 14126:2003 (infective agent protection)
• EN 1149-5:2008 (antistatic suit material)
• Approved for use in ATEX zones 2/21, 22 and chemical group IIA
  * Only encapsulating suits with sewn-in socks/booties.