Amron Mag-Drive Centrifugal Seal-Less Pump PMA1000, 1000 GPH, 230V

• This reliable, heavy-duty centrifugal pump provides a steady flow of cooling water through the air conditioning system and is the ideal marine air conditioner pump for applications up to 48,000 BTU.
• Capable of generating a maximum flow of 17 gallons per minute at 1 foot, and its maximum head is 27 feet (or around 11 psi).
• The impeller has a carbon bushing allowing the pump to run dry longer before suffering damage.
• Its magnetic drive design means that a shaft is not required, therefore reducing the components that are susceptible to damage and wear over time.
• Serviceable with a screwdriver.

• Motors have UL-listed motors, which are rated for continuous duty.
• Ignition protected per SAE J1171 and ISO 8846. 
• Standard Wet End Materials:
  • Polypropylene
  • Buna N
  • Ceramic
  • Ceramic magnet
• Max Flow: 17 gpm / 64.4 lpm
• Max Head: 27 ft. / 8.2 m
• Max Internal Pressure: 50 psi (3.4 bar)
• Max Liquid Temperature: 190 °F (87 °C)
• Power: 0.125 HP / 0.093 KW
• Voltage: 230 V 50/60 Hz
• Cord Length: 3 ft. (0.9 m)
• Inlet: 1 in. FPT
• Outlet: 1/2 in. MPT
• Dimensions: 6.19 in. x 4.52 in. x 9.27 in.
• Packed Weight: 8.55 lbs.

NOTE: All specifications & data are based on pumping water & are intended as a guideline only. Specifications may vary with different motors

Pumps are not self-priming, lack a suction lift, and thus require a flooded suction. Pumps cannot be run dry because the impeller requires the liquid being pumped for lubrication. For liquids with a specific gravity greater than water, have a higher viscosity, or for elevated temperatures, a trimmed impeller may be necessary.