Amron 3-Part Umbilical 500 ft.

• Tough, kink, and abrasion resistant
• Buoyant in sea and fresh water
• Clean and odor free
• Flexible and non-aging

• Length: 500 ft.
• 3-part umbilical-air, pneumo, and comms/strength
• (2) #6 JIC Phosphor Bronze Fitting 3/8 in. ID - installed on both ends of the divers air hose
• #4 JIC Phosphor Bronze Fitting ¼ in. ID installed the surface end of the pneumo hose; unterminated on the diver's side
• 4-pin female waterproof connector installed on the diver's side of the communications cable
• Dual banana plugs on the surface end of the communications cable
• D-ring with shackle installed on the diver's end and seized 48 inches from end of hose
• D-ring installed on the surface end and seized 10 feet from end of hose
• Brass tag
• Tested with certification provided

Note: Umbilical lengths are subject to +/- 2% over/under to the quoted length.

Note: Canadian Standards Association code CSA-275.2-04 states that the diver's lifeline shall have a breaking strength of no less than 2000 lbs. This umbilical does not meet that standard. Please contact your Amron sales representative for an alternate spiral umbilical that can meet this standard.

Amron sells many different diving umbilical configurations. If you don't see the configuration you need, please call our award-winning sales staff at (760) 208-6500 or email us at sales@amronintl.com to help build your diving umbilical, get a quote, and place your order today!