Request a Quote

Please fill out the following form below.

TESCOM 44-1116-24 Pressure Reducing Regulator 50-6,000 PSIG - Brass

SKU: 44-1116-24 Rate this product

$557.00

Availability: 3 In Stock. Usually ships in 7 weeks if not in stock.

Click to Enlarge Image

Overview

Applications:

  • Ground Support Equipment (GSE)
  • Support pressure panels
  • Aircraft charging carts
  • R & D laboratories
  • Calibration equipment

Features:

  • Removable valve assembly module permits easy repair
  • Excellent sensitivity through a wide range of pressure settings
  • Piston style sensor offers extra safety and reliability
  • Unbalanced stem assists positive shut-off
  • Inlet and outlet gauge ports standard
  • Venting is standard
  • Regulator vents to zero PSIG in all pressure ranges

Specifications:

  • Maximum Rated Inlet Pressure: 6000 PSIG / 414 bar
  • Outlet Pressure Range: 50-6,000 PSIG / 3.4-414 bar
  • Design Proof Pressure: 150% of maximum rated inlet
  • Leakage: Bubble-tight
  • Operating Temperature: -40 degrees F to +165 degrees F (-40 degrees C to +75 degrees C)
  • Flow Capacity: Cv = .06
  • Maximum Operating Torque: 35 in.-lb. (3.95 Nm)
  • Body Material: Brass
  • Inlet and Outlet Ports: 1/4 in. NPTF

Media Contact Materials:

  • Body: Brass
  • Filter Brass Body: 40 Micron (nominal) - Bronze
  • Main Valve Seat: Vespel®
  • Vent Valve Seat: CTFE
  • O-Rings: Buna-N
  • Back-up Rings: Teflon®
  • Remaining Parts: 300 Series Stainless Steel

Other:

  • Cleaning: CGA 4.1 and ASTM G93
  • Weight: 4.8 lbs / 2.2 kg
Description

Tescom 44-1116-24 high pressure, low flow venting regulator offers a piston sensed design, control pressures of 50-6,000 PSIG / 3.4-414 bar with a low torque setting and large hand-knob.

Videos

Additional Information

Search Weight 40
Brand TESCOM
Managed FEATURED PRODUCT
GSA Yes
DOD No
Clearance Item No
Video No
FAQ
 

Product FAQ's

Ask a Question

  • What type of lubricant should I use when overhauling my Tescom regulator?
    The only approved lubricant is Christo-Lube MCG-111.
    How helpful was this information?

  • What is the repair kit # required to rebuild this regulator?
    The Standard Regulator Repair Kit for the 44-1100 Series TESCOM regulators is P/N 389-1449. This product page can be found in the "Customers Who Bought This Item Also Bought" section of the regulator's product page.
    How helpful was this information?

ATTACHMENTS

Customers Who Bought This Item Also Bought