Request a Quote

Please fill out the following form below.

TESCOM 44-1112-24 Pressure Reducing Regulator 0-800 PSIG – Brass

SKU: 44-1112-24 Rate this product


Availability: 2 In Stock. Usually ships in 7 weeks if not in stock.

Click to Enlarge Image



  • Ground Support Equipment (GSE)
  • Support pressure panels
  • Aircraft charging carts
  • R & D laboratories
  • Calibration equipment


  • Removable valve assembly module permits easy repair
  • Excellent sensitivity through a wide range of pressure settings
  • Piston style sensor offers extra safety and reliability
  • Unbalanced stem assists positive shut-off
  • Inlet and outlet gauge ports standard
  • Venting is standard
  • Regulator vents to zero PSIG in all pressure ranges


  • Maximum Rated Inlet Pressure: 6000 PSIG / 414 bar
  • Outlet Pressure Range: 0-800 PSIG / 0-55.2 bar
  • Design Proof Pressure: 150% of maximum rated inlet
  • Leakage: Bubble-tight
  • Operating Temperature: -40 degrees F to +165 degrees F (-40 degrees C to +75 degrees C)
  • Flow Capacity: Cv = .06
  • Maximum Operating Torque: 35 in.-lb. (3.95 Nm)
  • Body Material: Brass
  • Inlet and Outlet Ports: 1/4 in. FNPT

Media Contact Materials:

  • Body: Brass
  • Filter Brass Body: 40 Micron (nominal) - Bronze
  • Main Valve Seat: Vespel®
  • Vent Valve Seat: CTFE
  • O-Rings: Buna-N
  • Back-up Rings: Teflon®
  • Remaining Parts: 300 Series Stainless Steel


  • Cleaning: CGA 4.1 and ASTM G93
  • Weight: 4.8 lbs / 2.2 kg

Note: Comes with Inlet and Outlet Gauge Ports


Tescom 44-1112-24 high pressure, low flow venting regulator offers a piston sensed design, control pressures of 0-800 PSIG / 0-55.2 bar with a low torque setting and large hand-knob.


Product FAQ's

Ask a Question

  • What type of lubricant should I use when overhauling my Tescom regulator?
    The only approved lubricant is Christo-Lube MCG-111.
    How helpful was this information?

  • What is the repair kit # required to rebuild this regulator?
    The Standard Regulator Repair Kit for the 44-1100 Series TESCOM regulators is P/N 389-1449. This product page can be found in the "Customers Who Bought This Item Also Bought" section of the regulator's product page.
    How helpful was this information?